Warmoth modern construction tiltback neck: Is the headstock screwed?

[SuperWideHeaven]

Hi there,

on May 2020 in a Youtube video Aaron from Warmoth talks about and shows Warmoth modern construction tiltback necks. Between minute 0:55 - 1:05 on the backside of the neck underneath the headstock, the ends of two little dark round pieces can be seen, which look like allen screws:
https://www.youtube.com/watch?v=Xd153K_tc2c

What is it exactly and what is it function? I never saw this on any picture in the custom neck builder site of the Warmoth neck:
https://warmoth.com/index.php/guitar-necks/warmoth?Construction=Modern+Tiltback

Are these "allen screws" are still used for the Warmoth modern construction tiltback neck. Or did the construction of this neck changed since the video was recorded? And that's why the "allen screws" are not shown on images of this neck?

Regards,
Bernd

 

[mayfly]

eh - those are to attach the Floyd Rose locking nut.

 

[stratamania]

Indeed Floyd Rose nut mounting bolts. If you are not using one then they will not be there.

 

[SuperWideHeaven]

Thank you Mayfly and Stratamania, you made my day!  ccasion14:

Because I ordered one of these necks (without Floyd Rose mounting bolts) I feared that my neck would also come with these bolts, which I wouldn't have liked.

 

[DangerousR6]

Thank you Mayfly and Stratamania, you made my day!  ccasion14:

Because I ordered a one of these necks (without Floyd Rose mounting bolts) I feared that my neck would also come with these bolts, which I wouldn't have liked.

As Stratamania says more or less, is that if you didn't order it with the Floyd prep, you needn't worry. it won't be on your neck. :icon_thumright: