vanstry
Junior Member
- Messages
- 102
Okay, some of you may recall this topic went around a number of months ago. At least one other person here has done this and now it's my turn. I wired it as per the diagram posted here and flipped the magnet in the neck pickup.
But, it's not working right. Positions 2 and 4 don't work - totally dead.
The screw side of the bridge pickup doesn't work either. Totally dead.
So, is the switch bad?
The pickup bad? (Seymour Duncans, I wonder if they have a guarantee, especially after I flipped the magnet).
Or are they both bad? No, it's not a cold soldier joint. I checked.
Could it be the wiring diagram everyone said to use was bad?
Anybody done this before?
-John
But, it's not working right. Positions 2 and 4 don't work - totally dead.
The screw side of the bridge pickup doesn't work either. Totally dead.
So, is the switch bad?
The pickup bad? (Seymour Duncans, I wonder if they have a guarantee, especially after I flipped the magnet).
Or are they both bad? No, it's not a cold soldier joint. I checked.
Could it be the wiring diagram everyone said to use was bad?
Anybody done this before?
-John