Need a favor from a planet waves owner

runtfan

Active member
Messages
35
Would someone mind giving me a quick measurement of a PW autotrim tuner?  I want to put a set on a neck that I have, but I'm worried that the spaces are too close.

The PW website is less than helpful.

Thanks!
 

DocNrock

Senior member
Messages
4,295
What measurements?  The hole diameter is 13/32", but you got that from the Warmoth website, right?
 

mayfly

Senior member
Messages
8,173
Also, what headstock?  the 6 in-line type is different from the 3x3 type.

BTW mine fit nicely on a tele.  The 6 inline are not any larger than Schaller minis.
 

runtfan

Active member
Messages
35
Wow, forgive me for not being specific.

It is not a "stock" neck, and it's a 12-string.  I don't have it in front of me right not, or I would measure the space between the holes. 

I was looking for the width of the tuners (not the diameter of the hole), so that I know how closely together they can go.

Thanks.
 

jackthehack

Senior member
Messages
5,630
Width? Does not really compute....

Height from top of shaft to bottom of round part, not counting the little tab for the anchoring screw is exactly 3/4".

Width of the main part of the tuner, not counting the shaft/knob is 9/16".

The washer under the nut on the front of the peghead is 5/8"

Hope that answers it...
 

blue313

Senior member
Messages
2,824
Found this over on StewMac. 

5280_1spec.gif
 
Top