ragamuffin
Hero Member
- Messages
- 1,539
Thanks! Yes I did wipe on satin poly over the tea stain, forgot to mention that
Mojotone 5e3 Tweed Deluxe amp head build
- Thread starter ragamuffin
- Start date
S
Spud
Guest
Come on, let’s not be remiss!
S
Spud
Guest
I guess I too was remiss by not inquiring how well your fingers are healing from the incidental soldering iron contact?!!
ragamuffin
Hero Member
- Messages
- 1,539
Haha I managed to complete the build fingerburn-free (somehow)
ragamuffin
Hero Member
- Messages
- 1,539
I had a scare last night; I tried plugging into a different cab (a Mills 2x12 with Eminence GB12s) and no sound came out! So I opened up the back panel of my amp and searched for an issue. Tubes were glowing, all the voltage test points were fine.
30 minutes later I discovered that I had plugged the speaker cable into the "Aux speaker" jack instead of the "speaker" jack.
30 minutes later I discovered that I had plugged the speaker cable into the "Aux speaker" jack instead of the "speaker" jack.
S
Spud
Guest
I figured you did the soldering looks very tidy!
ragamuffin
Hero Member
- Messages
- 1,539
Did two simple mods from Rob Robinette's 5e3 mods website; the phase inverter grid stop resistor (supposedly smooths the overdrive, pretty subtle) and the three way negative feedback switch (not so subtle and adds a ton of versatility to the amp).
Stock, the amp is very squishy and dirties up quick. With the negative feedback switch engaged it's a good bit cleaner and tighter sounding. Both sound great, but with the NFB it makes a better pedal platform, which is generally how I run my amps.
Also the custom amp badge that I ordered came in the mail today yesterday! Ordered from Droplight Ltd. who did a great job, very high quality work.
(Willow and Mittens want to know what this big amp thing is doing in the middle of living room)
Stock, the amp is very squishy and dirties up quick. With the negative feedback switch engaged it's a good bit cleaner and tighter sounding. Both sound great, but with the NFB it makes a better pedal platform, which is generally how I run my amps.
Also the custom amp badge that I ordered came in the mail today yesterday! Ordered from Droplight Ltd. who did a great job, very high quality work.
(Willow and Mittens want to know what this big amp thing is doing in the middle of living room)
S
Spud
Guest
Very cool mods! Please give Willow a big hugger for me!
ragamuffin
Hero Member
- Messages
- 1,539
Will do! She's a lover!
Ozopart
Junior Member
- Messages
- 183
Just wondering how satisfied you are with the Mojotone 5e3 now? I can get a fully built out 5e3 from Mojotone for ~$1.2k. I am interested in this amp but was wanting a Victoria 20112. If the Mojotone is comprable, the cost difference would be a big factor in my decision. Thanks!I've wanted to try my hand at building an amp kit for a long time, and I finally built the bullet! I ordered a Mojotone 5e3 Tweed Deluxe kit, and I'll be building a headshell for it. Today I populated/soldered the turret board, except for a missing 100k resistor... I'll have to wait for Mojotone to send me another. In the mean time I'll be working on the headshell, which I'm building out of pine.
ragamuffin
Hero Member
- Messages
- 1,539
It's a pretty great sounding amp; it breaks up pretty early (compared to a Deluxe Reverb for example), it's best for gritty cleans/light overdrive. It's got that "tweed" chewy, gritty sound in spades! I'd definitely recommend it if that sounds like something you'd enjoy.
Is the $1.2k for one built by Mojotone? That sounds very reasonable to me; the amp kit + speaker + cab costs like $1k unbuilt
Ozopart
Junior Member
- Messages
- 183
Yes, the $1.2k is built by them.
Here is the link to Reverb. But I can buy direrct from Mojotone for an even slightly lower price.
