Help Finding 2 PIN inline connectors ?

[Steve_Karl]

Does anyone know where to get these ... and as a pair M and F? I also need the male mate to this one.
An MX-24 2695 is exactly the same as I have an other one with those numbers on it and they're interchangeable.

Thank you!

​

 

[Steve_Karl]

I found a good substitute!

http://www.futurlec.com/ConnHead.shtml

 

[dbw]

You can just use solid core wire with the end stripped.

 

[Cagey]

I found a good substitute!

http://www.futurlec.com/ConnHead.shtml

Since you found what you needed, this'll be no help now. But, for future reference, Allied and Mouser are both huge electronics supply houses who sell that sort of thing, amongst millions of other things.

 

[Steve_Karl]

Thanks!

 

[Patrick from Davis]

You'll need an open barrel crimper if you do the crimp/make your own route (the ones at the bottom)
Patrick

 

[Panthur]

Peaked my curiosity, what exactly are these being used for ?

 

[Steve_Karl]

The is is my current system. The only thing I didn't have for the clone of this system, that is being installed in a second guitar
is the brown connector above the middle ferrite bead.