Miskatonic
Junior Member
- Messages
- 118
I'm parting out two of my guitars because I've lost interest and money is better than guitars collecting dust.
Here's the order invoices for the bodies and necks so you know all the features that were picked:
Warmoth VIP
Carved Top Standard VIP
Right handed
DL Quilt Maple on Mahogany
Rear Rout
F-Holes: None
Pickup Rout: (Humbucker (Neck), None (Middle), Humbucker (Brdg))
Controls: (Volume (Strat®), Tone 1 (Strat®), X, 5 Way Switch (Strat®), X, X)
Bridge: Recessed Wilkinson Tremolo
Side Jack: 3/4" (19.05mm) Side Jack Hole
Tummy Cut, Contoured Heel
Mounting Holes: Standard 4 Bolt
Neck Pocket: Strat® Shape
Binding Top: White Binding,
Top Finish: Red Dye
Back Finish:Black Gloss
Battery Box: None
Stud Install: Use inserts from bridge on order
Warmoth Pro Angled, Right Handed
Mahogany
Ebony Fretboard
1 11/16" Nut Width
Standard thin
SS6100 (Stainless)
Schaller (25/64", 11/32") Tuner Ream
22 frets
10-16" Compound Radius
Mother Of Pearl Dots Inlay
GraphTech Black TUSQ XL
25-1/2 in. Scale
Standard 4 Bolt
Finish: Black Gloss
Warmoth Explorer (Nomad)
Model: Nomad
Orientation: Right handed
F-Holes: None
Scale: 25-1/2"
Wood: Mahogany
Rout: Rear Rout
Pickup Rout: None (Neck), None (Middle), Humbucker (Brdg)
Controls: V-X-T-X-X (X-Bird)
Bridge: Recessed Schaller Floyd Tremolo
Stud Install: Use inserts from bridge on order
Jack Rout: 3/4" (19mm) Side Jack Hole
Neck Pocket: Strat® Shape
Mounting Holes: Standard 4 Bolt
Battery Box: No Battery Box Rout
Top Finish: Black Gloss
Back Finish: Black Gloss
Style: Nomad
Construction: Modern Tiltback Construction
Orientation: Right Handed
Neck Wood: Mahogany
Fingerboard Wood: Indian Rosewood
Nut Width: 1-11/16"
Back Shape: Standard thin
Fret Size: 6100
Tuner Ream: Schaller (25/64" 11/32")
Radius: 10-16" Compound
Scale: 25-1/2"
Fret #: 22
Mounting Holes: Standard 4 Bolt
Pre-Cut Installed String Nut: R4 Floyd Prep w/ Mounting Holes
Inlays: Cream Face Dots
Finish: Clear Gloss
-----------------------------
I'm asking:
$550 for the VIP body
$250 for the Warmoth neck. I was going to ask $300 but given the paint and thin pieces of material that were accidentally pulled off on the back of the headstock when I removed the tuners, I'm subtracting an additional $50. These aren't visible with the tuners fastened to the headstock. Not sure if it was an issue with the paint or not. It's black with gloss so not a difficult color to match. I've taken pictures to show the damage.
$45 for the Wilkinson Tremolo (Black)
$300 for the explorer body
$200 for the explorer neck
$100 for the Schaller Floyd Rose. (Black)
PayPal is the preferred method of payment.
These prices don't include shipping. I ship out of WA state.
Here's the gallery with all the pics. If additional pictures are required just let me know what you want to see specifically.
http://www.imagebam.com/gallery/y5jff6ywo5paxo6uhm6gujiwwl028207
Feel free to ask any questions
Thanks!
- Derik
Here's the order invoices for the bodies and necks so you know all the features that were picked:
Warmoth VIP
Carved Top Standard VIP
Right handed
DL Quilt Maple on Mahogany
Rear Rout
F-Holes: None
Pickup Rout: (Humbucker (Neck), None (Middle), Humbucker (Brdg))
Controls: (Volume (Strat®), Tone 1 (Strat®), X, 5 Way Switch (Strat®), X, X)
Bridge: Recessed Wilkinson Tremolo
Side Jack: 3/4" (19.05mm) Side Jack Hole
Tummy Cut, Contoured Heel
Mounting Holes: Standard 4 Bolt
Neck Pocket: Strat® Shape
Binding Top: White Binding,
Top Finish: Red Dye
Back Finish:Black Gloss
Battery Box: None
Stud Install: Use inserts from bridge on order
Warmoth Pro Angled, Right Handed
Mahogany
Ebony Fretboard
1 11/16" Nut Width
Standard thin
SS6100 (Stainless)
Schaller (25/64", 11/32") Tuner Ream
22 frets
10-16" Compound Radius
Mother Of Pearl Dots Inlay
GraphTech Black TUSQ XL
25-1/2 in. Scale
Standard 4 Bolt
Finish: Black Gloss
Warmoth Explorer (Nomad)
Model: Nomad
Orientation: Right handed
F-Holes: None
Scale: 25-1/2"
Wood: Mahogany
Rout: Rear Rout
Pickup Rout: None (Neck), None (Middle), Humbucker (Brdg)
Controls: V-X-T-X-X (X-Bird)
Bridge: Recessed Schaller Floyd Tremolo
Stud Install: Use inserts from bridge on order
Jack Rout: 3/4" (19mm) Side Jack Hole
Neck Pocket: Strat® Shape
Mounting Holes: Standard 4 Bolt
Battery Box: No Battery Box Rout
Top Finish: Black Gloss
Back Finish: Black Gloss
Style: Nomad
Construction: Modern Tiltback Construction
Orientation: Right Handed
Neck Wood: Mahogany
Fingerboard Wood: Indian Rosewood
Nut Width: 1-11/16"
Back Shape: Standard thin
Fret Size: 6100
Tuner Ream: Schaller (25/64" 11/32")
Radius: 10-16" Compound
Scale: 25-1/2"
Fret #: 22
Mounting Holes: Standard 4 Bolt
Pre-Cut Installed String Nut: R4 Floyd Prep w/ Mounting Holes
Inlays: Cream Face Dots
Finish: Clear Gloss
-----------------------------
I'm asking:
$550 for the VIP body
$250 for the Warmoth neck. I was going to ask $300 but given the paint and thin pieces of material that were accidentally pulled off on the back of the headstock when I removed the tuners, I'm subtracting an additional $50. These aren't visible with the tuners fastened to the headstock. Not sure if it was an issue with the paint or not. It's black with gloss so not a difficult color to match. I've taken pictures to show the damage.
$45 for the Wilkinson Tremolo (Black)
$300 for the explorer body
$200 for the explorer neck
$100 for the Schaller Floyd Rose. (Black)
PayPal is the preferred method of payment.
These prices don't include shipping. I ship out of WA state.
Here's the gallery with all the pics. If additional pictures are required just let me know what you want to see specifically.
http://www.imagebam.com/gallery/y5jff6ywo5paxo6uhm6gujiwwl028207
Feel free to ask any questions
Thanks!
- Derik
