Meadowhawk Inferno Burst build thread

[Heavy Rock]

That's an awesome looking guitar! Love the purple in there, gives it a uniqueness. Zebra guy here too. Even the JB I use under the plastic cover is zebra.

 

[Hagwood]

That's an awesome looking guitar! Love the purple in there, gives it a uniqueness. Zebra guy here too. Even the JB I use under the plastic cover is zebra.

Thanks, I appreciate it.

 

[Hagwood]

Final coats of Nitro done !!!!

18 coats total, now time to cure for 3 weeks before buffing/polishing. A few areas of very minor orange peel, but overall looks great, should sand out perfectly, probably starting with 1000 grit assilex.






I love the way the back and the neck shaft turned out, was trying for the heritage cherry look, but in blue. First time I have finished a neck or used tinted nitro, but with the mahogany I thought it was a good opportunity to try it. I think by the time it is polished and waxed it will feel great.





I still need to do a little touch up to blend in the fretboard edge lacquer with the top, but it is looking like it will work well.




Already have the wiring ran for the EMGS and cleaned up the holes while the nitro was still soft to avoid chipping:




Did a test dry fit of everything:

 

[Spud]

Final coats of Nitro done !!!!

18 coats total, now time to cure for 3 weeks before buffing/polishing. A few areas of very minor orange peel, but overall looks great, should sand out perfectly, probably starting with 1000 grit assilex.


View attachment 66529
View attachment 66530


I love the way the back and the neck shaft turned out, was trying for the heritage cherry look, but in blue. First time I have finished a neck or used tinted nitro, but with the mahogany I thought it was a good opportunity to try it. I think by the time it is polished and waxed it will feel great.

View attachment 66531



I still need to do a little touch up to blend in the fretboard edge lacquer with the top, but it is looking like it will work well.

View attachment 66532


Already have the wiring ran for the EMGS and cleaned up the holes while the nitro was still soft to avoid chipping:
View attachment 66533
View attachment 66534


Did a test dry fit of everything:
View attachment 66537

very niiiiice Haggy!

 

[Hodgo]

So friggin gorgeous. I get Morse Y2D vibes, but even better cause of all that Meadowhawky goodness. Can I order one from you??? When are you opening up your finishing shop??

 

[Strangs]

It's so pretty!
Time play it so much the finish wears off

 

[Hagwood]

very niiiiice Haggy!

Thanks !

 

[Hagwood]

So friggin gorgeous. I get Morse Y2D vibes, but even better cause of all that Meadowhawky goodness. Can I order one from you??? When are you opening up your finishing shop??

Thanks, but I take so damn long and am so 'Fussy and Picky', I would lose my A$$ doing it as a business