Hipshot locking machines... with Warmoth Tuner Hole Size Schaller/Modern Fender/Sperzel (25/64") ??

[rockandroller]

I have a new 7/8th warhead neck with Warmoth Tuner Hole Size
Schaller/Modern Fender/Sperzel (25/64")

And last year i used a staggered hipshot locking kit (with the plates) on my 7/8th superstrat with same size neck holes and plan to do so again.
The kit I got last year fit perfectly with no reaming, pretty sure they were standard original Hipshot size , not the 8.5mm 'vintage'... (lost the purchase details so not 100% sure which ones they are)

BUT the Hipshot site now is only listing
8.5mm Post Hole
or
10mm Post Hole

the 25/64th (9.921 mm) Warmoth hole spec is smaller than 10mm but way bigger than 8.5 mm
which set should i order??

thanks!

 

[Rick]

I always get the 10mm, and if need be, take a pencil, wrap some 220 grit around it, and smooth out the bore. Not an issue.

 

[stratamania]

The 10 mm and adjust the hole if required.