Did I make a mistake?

tjc_

Newbie
Messages
5
I just placed an order and already found one slight mistake. Do you mind looking this over and make sure I didn't make anymore?

Body:
Model: Telecaster®
Orientation: Right handed
Scale: 25-1/2"
Wood: Walnut
Rout: Top Rout
Pickup Rout: P90 (Neck), None (Middle), Tele® (Bridge)
Controls: None
Bridge: Tele® Bridge
Jack Rout: 7/8" (22mm) Side Jack Hole
Neck Pocket: Tele® Shape ---> I changed this to Strat Pocket (the mistake I mentioned)
Mounting Holes: Standard 4 Bolt
Contours: Contoured Heel
F-Holes: None
Top Finish: Clear
Back Finish: Clear
Finish Type: Satin Finish

Neck:
Style: Warmoth
Construction: Modern Tiltback Construction
Scale: 25-1/2"
Orientation: Right Handed
Neck Wood: Roasted Flame Maple
Fingerboard Wood: Pau Ferro
Unique Choice: FB4235
Nut Width: 1-11/16"
Back Shape: Wolfgang
Fret Size: SS6115 (Stainless)
Tuner Ream: Gotoh/Grover (13/32" 11/32")
Radius: 10-16" Compound
Fret #: 22
Mounting Holes: Standard 4 Bolt
Inlays: Black Mother Of Pearl Dots
Side Dots: Mother Of Pearl Side Dots
String Nut: GraphTech Black TUSQ XL - Standard Nut
 
I guess the only thing I would ask, is will the neck heel match the telecaster body?  I would check that.
 
rick2 said:
I guess the only thing I would ask, is will the neck heel match the telecaster body?  I would check that.

Ya sorry, that is the slight mistake I made. I contacted them and changed it from a Tele pocket to a Strat pocket and edited my post. Everything else looks good though?
 
tjc_ said:
rick2 said:
I guess the only thing I would ask, is will the neck heel match the telecaster body?  I would check that.

Ya sorry, that is the slight mistake I made. I contacted them and changed it from a Tele pocket to a Strat pocket and edited my post. Everything else looks good though?

Hard to know as you edited your post.
 
STOP...

No seriously this.

  Tuner Ream:  Gotoh/Grover (13/32" 11/32")

Why are you using this tuner ream?  Very few things fit it including Grovers.

What specific tuners are you going to use?
 
stratamania said:
STOP...

No seriously this.

  Tuner Ream:  Gotoh/Grover (13/32" 11/32")

Why are you using this tuner ream?  Very few things fit it including Grovers.

What specific tuners are you going to use?

My plan is to use Hipshots. When I looked them up it states they fit the same hole as Gotoh.
 
With the hipshots you need straight holes.  Usually Schaller holes.  They are 10mm. Use a piece of sandpaper wrapped around a pencil if the fit is too snug.  The gotoh holes offered by warmoth have a step.
 
Thank you! I looked through some more discussions and it looks like the 25/64ths hole was the way to go. I sent them an email this morning requesting the change.

I really appreciate you all looking this over and asking the questions!
 
Back
Top