Did I make a mistake?

tjc_

New member
Messages
5
I just placed an order and already found one slight mistake. Do you mind looking this over and make sure I didn't make anymore?

Body:
Model: Telecaster®
Orientation: Right handed
Scale: 25-1/2"
Wood: Walnut
Rout: Top Rout
Pickup Rout: P90 (Neck), None (Middle), Tele® (Bridge)
Controls: None
Bridge: Tele® Bridge
Jack Rout: 7/8" (22mm) Side Jack Hole
Neck Pocket: Tele® Shape ---> I changed this to Strat Pocket (the mistake I mentioned)
Mounting Holes: Standard 4 Bolt
Contours: Contoured Heel
F-Holes: None
Top Finish: Clear
Back Finish: Clear
Finish Type: Satin Finish

Neck:
Style: Warmoth
Construction: Modern Tiltback Construction
Scale: 25-1/2"
Orientation: Right Handed
Neck Wood: Roasted Flame Maple
Fingerboard Wood: Pau Ferro
Unique Choice: FB4235
Nut Width: 1-11/16"
Back Shape: Wolfgang
Fret Size: SS6115 (Stainless)
Tuner Ream: Gotoh/Grover (13/32" 11/32")
Radius: 10-16" Compound
Fret #: 22
Mounting Holes: Standard 4 Bolt
Inlays: Black Mother Of Pearl Dots
Side Dots: Mother Of Pearl Side Dots
String Nut: GraphTech Black TUSQ XL - Standard Nut
 

Rick

Senior member
Messages
4,520
I guess the only thing I would ask, is will the neck heel match the telecaster body?  I would check that.
 

tjc_

New member
Messages
5
rick2 said:
I guess the only thing I would ask, is will the neck heel match the telecaster body?  I would check that.

Ya sorry, that is the slight mistake I made. I contacted them and changed it from a Tele pocket to a Strat pocket and edited my post. Everything else looks good though?
 

TBurst Std

Senior member
Messages
2,663
tjc_ said:
rick2 said:
I guess the only thing I would ask, is will the neck heel match the telecaster body?  I would check that.

Ya sorry, that is the slight mistake I made. I contacted them and changed it from a Tele pocket to a Strat pocket and edited my post. Everything else looks good though?

Hard to know as you edited your post.
 

stratamania

Senior member
Messages
9,464
STOP...

No seriously this.

  Tuner Ream:  Gotoh/Grover (13/32" 11/32")

Why are you using this tuner ream?  Very few things fit it including Grovers.

What specific tuners are you going to use?
 

tjc_

New member
Messages
5
TBurst Std said:
Hard to know as you edited your post.

OK, how can I make it easier? If you take a look at my post, does everything look right?
 

tjc_

New member
Messages
5
stratamania said:
STOP...

No seriously this.

  Tuner Ream:  Gotoh/Grover (13/32" 11/32")

Why are you using this tuner ream?  Very few things fit it including Grovers.

What specific tuners are you going to use?

My plan is to use Hipshots. When I looked them up it states they fit the same hole as Gotoh.
 

Rick

Senior member
Messages
4,520
With the hipshots you need straight holes.  Usually Schaller holes.  They are 10mm. Use a piece of sandpaper wrapped around a pencil if the fit is too snug.  The gotoh holes offered by warmoth have a step.
 

tjc_

New member
Messages
5
Thank you! I looked through some more discussions and it looks like the 25/64ths hole was the way to go. I sent them an email this morning requesting the change.

I really appreciate you all looking this over and asking the questions!
 
Top