Push pull question

Mark W

Active member
Messages
63
I'm changing my wiring from standard gibson to two volumes and two tones with a push pull to split the coils.
Do I need two push pull pots to do the job?
I was looking at this
http://www.deaf-eddie.net/drawings/1pp-shunt.jpg
and I was wondering if that will do.
I want to play each pickup split individually, mainly the neck.
I would like the tone to be the push/pull.
It seems Seymour and other sites only have the setup for two push pulls, and guitarelectronics just shows it with the volumes as the push/pulls

Thanks in advance for the help
 

tfarny

Senior member
Messages
4,481
Yes that diagram will work - you want one control that taps both pups at the same time, right? Yes you need a push-pull pot to have a push-pull coil tap (!?)
 

Mark W

Active member
Messages
63
Thanks for your reply.
Yes I do want them split at the same time, I just didn't know if they would play/adjust individually when split or I would need two push pull pots.

My comment about the tone being push/pull was in regard to using the tone pot itself as opposed to the volume pot.

Thanks so much for the quick response. :eek:ccasion14:
I'm off to the workshop !!
 
Top