Xplorervoodoo
Hero Member
- Messages
- 984
Hey guys, I'm bored, so I figured I'd lay down what I've got planned for my next build!
Here's the specs I've come up with. The plan is to make this sort of a checklist, and update the list as I get the parts.
Body:
Warmoth V (Gibson Style)
Swamp Ash
Rear Routed (1 volume, 1 Tone, 2-way switch - may drill these myself)
HxH pickup routing
Recessed TOM routing with staggered string thru
Routed for a single battery box (if possible)
I may omit the jack hole, I'd really like to have a recessed strat-style jack plate on the inner part of the lower wing...
Alpine White finish
Neck:
Warmoth 24 3/4 conversion neck - Warmoth headstock
1 11/16 nut width, precut and installed graphite
Fat back contour
SS6105 Frets
Drilled for PW tuners
Iron Cross inlay *5th Fret only* <-- Hopefully they can still do the iron cross inlay
Wenge neck, Ziricote fretboard (possibly a unique choice board)
Parts:
EMG 60 (White Cover - Neck) - *ALREADY HAVE*
EMG 81 (White Cover - Bridge) - *ALREADY HAVE*
Black hardware - Gotoh TOM, PW Tuners, string ferrules, jackplate and screws
Ebony pickup rings *ALREADY HAVE*
Custom TRC *ALREADY HAVE*
Custom control knobs *ALREADY HAVE*
I'll post pictures from time to time as I get the parts in. Cheers guys, lemme know what you think!
Here's the specs I've come up with. The plan is to make this sort of a checklist, and update the list as I get the parts.
Body:
Warmoth V (Gibson Style)
Swamp Ash
Rear Routed (1 volume, 1 Tone, 2-way switch - may drill these myself)
HxH pickup routing
Recessed TOM routing with staggered string thru
Routed for a single battery box (if possible)
I may omit the jack hole, I'd really like to have a recessed strat-style jack plate on the inner part of the lower wing...
Alpine White finish
Neck:
Warmoth 24 3/4 conversion neck - Warmoth headstock
1 11/16 nut width, precut and installed graphite
Fat back contour
SS6105 Frets
Drilled for PW tuners
Iron Cross inlay *5th Fret only* <-- Hopefully they can still do the iron cross inlay
Wenge neck, Ziricote fretboard (possibly a unique choice board)
Parts:
EMG 60 (White Cover - Neck) - *ALREADY HAVE*
EMG 81 (White Cover - Bridge) - *ALREADY HAVE*
Black hardware - Gotoh TOM, PW Tuners, string ferrules, jackplate and screws
Ebony pickup rings *ALREADY HAVE*
Custom TRC *ALREADY HAVE*
Custom control knobs *ALREADY HAVE*
I'll post pictures from time to time as I get the parts in. Cheers guys, lemme know what you think!