Hi All,
I am making a light as possible Tele and want to use these tuners - but...
They have 6mm shafts and a bushing that is 8mm/ (OD). The smallest Tuner hole (11/32) choice on the necks is 11/32 (8.73mm). Worse than that the drawing for the stealth shows a stepped tuner hole with 6mm at the back of the neck for maybe 2mm and then 8mm the rest of the way up. I found a thread that shows a bushing with a 6mm ID, 11/32 OD to replace the top Stealth bushing but this leaves a lot of slop (6mm post and 8.73mm hole) at the base so this part of the shaft is unsupported...
Any one used these on the Warmoth necks? Any advise? Is there a custom tuner hole option somewhere?
http://www.g-gotoh.com/international/images/Stealth-en-1.jpg
Thanks!
I am making a light as possible Tele and want to use these tuners - but...
They have 6mm shafts and a bushing that is 8mm/ (OD). The smallest Tuner hole (11/32) choice on the necks is 11/32 (8.73mm). Worse than that the drawing for the stealth shows a stepped tuner hole with 6mm at the back of the neck for maybe 2mm and then 8mm the rest of the way up. I found a thread that shows a bushing with a 6mm ID, 11/32 OD to replace the top Stealth bushing but this leaves a lot of slop (6mm post and 8.73mm hole) at the base so this part of the shaft is unsupported...
Any one used these on the Warmoth necks? Any advise? Is there a custom tuner hole option somewhere?
http://www.g-gotoh.com/international/images/Stealth-en-1.jpg
Thanks!