Gotoh aluminum stop tailpiece fits warmoth LP ?

Ang3lus

Junior Member
Messages
150
anyone knows ?
i can't find any info viable information on that unit

found something:

The tailpiece, however, will fit any stop bar tailpiece with a 3 1/4" stud spacing if you reuse your existing studs. Impeccable Gotoh quality and worksmanship as usual, another example of why they make parts for some very serious brand names.

hmm, what does 3 1/4" means ?
warmoth pockets are 82mm, that's what i know
 
There are 25.4 mm in an inch.  That comes out to 3.27 inches.  Pretty close to 3 1/4 if you ask me.
 
I don't understand the question since Warmoth routes for the Gotoh TOM.  :icon_scratch:

82mm = 3.23 inches - which is pretty much 3 1/4 inches.
 
I believe it's the standard size. I'd assume it will fit - same maker, same basic idea, same attempt to be cross-compatible. you're talking about 0.5mm on each post, it'll work.
 
Note that the studs/inserts supplied with Gotoh and some other bridges from various sources are not always the same size as the stock routing that Warmoth does for the inserts....
 
Back
Top