A single P-Rail

rapfohl09

Hero Member
Messages
1,673
Ok, here is the diagram I was looking at....

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2_prails_1v_3w_mini

Now my question is, if I only had a single bridge P-Rail, would I still only connect it to the right poles of the DPDT switch? Just confirming cause I really dont know much about the little switches.

(Obviously the output of from the switch would go to the volume pot, not the 3-way)
 
While I'm not of much help, this post gave me a bit of an idea...an updated Fender Esquire, using a humbucker sized Tele Bridge, and a 4-way blade switch to select rail, P-90, or both in series or parallel.  That would be awesome...
 
Back
Top