7/8 S Body really small than strat ?

[leafkin]

the size of 7/8 S Body is  really smaller than a strat ? (if have the number of length and width)

what 22 frets neck for  7/8 S Body ?

(sorry,my english is poor....)

 

[ezas]

I have one and yes it is smaller.

You can use the 7/8 ths 24 3/4" Warhead neck (24 fret)
or the 24" Mustang/Jaguar neck (22 frets)

 

[leafkin]

thanks for reply

Could I use a 24 3/4" Scale Conversion Necks (22 fret) on 7/8 S Body ?

7/8 S Body is the smallest Warmoth body ?

 

[bagman67]

The 24.75" conversion neck are not compatible with the 7/8 scale bodies.  Only the 7/8 scale necks and 24" Mustang necks will work with the 7/8 body.

 

[Wyliee]

thanks for reply

Could I use a 24 3/4" Scale Conversion Necks (22 fret) on 7/8 S Body ?

7/8 S Body is the smallest Warmoth body ?

No.  You'll need to use either the 24 3/4 x 24 fret (7/8ths) necks or the 24" Mustang/Jag necks.  The 24 3/4" conversion neck will not intonate.

If you are looking for smaller bodies, you might also want to look at the Jaguar, Jagstang, Mustang or Musiclander.

 

[bagman67]

I love it when we agree, Wyliee - it means I've been paying attention.

 

[Wyliee]

Either that or you've corrupted me......

 

[bagman67]

no, no, no, Wyliee... I stopped practicing law years ago!

 

[leafkin]

thanks to all....

what is the REAL difference in  length and width on 7/8 S Body ? not scale length.

 

[AutoBat]

I'd guess it's 87.5% the size of a regular body (7/8ths).  I could be wrong about that though.

 

[Tempest]

The 24" Mustang Scale will work on them???  :icon_scratch: I had no idea! 

You learn something new every most days!

 

[drewfx]

There was another thread on this a few months back.

My recollection was that they are 7/8 of the 3 dimensional volume of a normal strat. And if you looked at the top you'd get a 2 dimensional area of 7/8.66667 or 7/8.33333 for any one dimensional measurement.

 

[ezas]

I also remember a really helpful post on the size difference but I couldn't think of anything to search on to bring it up.

Now that I think about it I was part of that thread. Let me see if I can find it.

Update: Found it. It's just a mock-up but it should be enough to get an idea: http://www.unofficialwarmoth.com/index.php?topic=19211.msg283136#msg283136

 

[Shadow]

I also remember a really helpful post on the size difference but I couldn't think of anything to search on to bring it up.

Now that I think about it I was part of that thread. Let me see if I can find it.

Update: Found it. It's just a mock-up but it should be enough to get an idea: http://www.unofficialwarmoth.com/index.php?topic=19211.msg283136#msg283136

Hopefully it helps.

There was another thread on this a few months back.

My recollection was that they are 7/8 of the 3 dimensional volume of a normal strat. And if you looked at the top you'd get a 2 dimensional area of 7/8.66667 or 7/8.33333 for any one dimensional measurement.

So then the frontal area would be equal to 3√(72/82) or ~0.915, in which case my mock up is a little bit off (2.5%), but it should be fairly close.

EDIT: If you want I could make another one with the smaller one centered.