Here is another great video on carving the neck.
https://www.youtube.com/watch?v=RzFnlM4IJ_E
If its a modern neck the truss rod should be directly below the fretboard. The Gotoh truss rod they use for that is a straight double action rod.
I did a black dye on a regular maple neck, it had a little bit of figure in it and came out pretty good. I put about 5 coats of satin nitro on top of the dye.
Also did a blue dye on a Floyd Rose Discovery neck, wanted a faded denim look.
It is tough to not get streaks in the dye with...
Just a thought for future reference. I can't remember who it was but I saw a repair video on YouTube where a guy was working on a crack and he applied the glue while holding the crack open as much as possible then used compressed air to gently force the glue into the crack. It seemed like it...
Good luck to everyone! It figures I would be up against some very tough competition and some board veterans to boot! Anyway I see I am allowed to post my build thread!
http://www.unofficialwarmoth.com/index.php?topic=29323.0
Thank you to anyone who does vote for me, I know I would have a hard...
That looks great, I would go very easy on the stain, don't want to hide that grain pattern. I just had great success with Crystalac BriteTone on my guitar. I sprayed on about 8 coats and let it set for a month before sanding and buffing. came out very nice.
A long time in coming but the Musicaster(yes that is the permanent name now) is done. I could not me more happy with the results. I wet sanded the finish with 2000-5000 paper and proceeded to buff. I Had to be careful with the wetsanding as I wanted to have some of the open grain still show...
I did a pretty extensive write up on how I gold or silver leaf logos.
http://www.unofficialwarmoth.com/index.php?topic=29130.0
http://www.unofficialwarmoth.com/index.php?topic=29130.0
Thanks guys! I have a few coats of Crystalac Bright Tone gloss clear on it now and letting it cure really well before I hit it with some 800/1000/1500/2000 buff.
I am off work over the wee of the 4th of July so I hope to get it all done then.
Bob
Not sure if this thread should stay in the work in progress or moved, mods feel free to move if needed. The guitar will no longer have any Warmoth parts. I got the body partially complete over the weekend.
African Mahogany with chambers in a MM Axis design.
One can never have too...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.