buckallred
Junior Member
- Messages
- 177
I read the other posts on this subject, but am still not clear.
My understanding is that the "gloss" finish applied by Warmoth (to my tele neck) is a polyurethane finish. So a clear poly spray from a can should be OK going over the decal and headstock . . . correct?
SO: After I carefully apply the waterslide decal, with no bubbles under it, and it thoroughly dries, I would like to spray clear polyurethane (from a can) over the decal (after masking off the sides, etc of the headstock).
What are the pitfalls here?
All advice and input is appreciated.
My understanding is that the "gloss" finish applied by Warmoth (to my tele neck) is a polyurethane finish. So a clear poly spray from a can should be OK going over the decal and headstock . . . correct?
SO: After I carefully apply the waterslide decal, with no bubbles under it, and it thoroughly dries, I would like to spray clear polyurethane (from a can) over the decal (after masking off the sides, etc of the headstock).
What are the pitfalls here?
All advice and input is appreciated.