slashin_velvet
Junior Member
- Messages
- 68
Long time lurker...first time poster...and this is my first warmoth project.
The details:
Build details as follows:
- Black Korina body with a Zebrano (or Zebrawood) laminate top - rear routed.
- Goncalo Alves Neck with Wenge Fingerboard
- Hipshot tuners (including D-Tuner) and string through bridge (going the Hipshot A) - Chrome Hardware including knobs
- Mick Brierley Pickups in a P/J Setup (Passive)- Mick is a fantastic custom pickup builder from Australia
- Not 100% sure of electronic setup. I have 2 standard pots and a push pull pot available. Interested in hearing options - thinking either series/parrallel mod, or push/pull tone pot with different caps for different tones.
Would appreciate thoughts on finish (danish oil or tru-oil) and electronics options.
Pictures as follows (excuse the poor quality of my phone)
The details:
Build details as follows:
- Black Korina body with a Zebrano (or Zebrawood) laminate top - rear routed.
- Goncalo Alves Neck with Wenge Fingerboard
- Hipshot tuners (including D-Tuner) and string through bridge (going the Hipshot A) - Chrome Hardware including knobs
- Mick Brierley Pickups in a P/J Setup (Passive)- Mick is a fantastic custom pickup builder from Australia
- Not 100% sure of electronic setup. I have 2 standard pots and a push pull pot available. Interested in hearing options - thinking either series/parrallel mod, or push/pull tone pot with different caps for different tones.
Would appreciate thoughts on finish (danish oil or tru-oil) and electronics options.
Pictures as follows (excuse the poor quality of my phone)