Death by Uberschall
Master Member
- Messages
- 4,162
Looking at DocNrock's GT-R made me decide to post my play toy up.
Since Doc knows what makes a GT-R so special, I'm sure he'll appreciate what I'm posting here.
Here it is:
1999 Mitsubishi Eclipse GSX (AWD)
Best E.T. so far:
11.45 @ 125.08 mph 22 psi on 93 pump gas, all 3510 lbs of it.
1.72 60-ft
Driven to the track and back home in full street trim. Car is set-up for 40 psi of boost on C-16 fuel. I need to up size my turbo exhaust housing to releave some excessive back pressure and then it will be a 10 second street car with a/c, all the options and a big, bad ass stereo.
I know you're going to ask :icon_jokercolor: It's putting down about 535 AWDWHP (all wheel drive horse power to the ground).
I'm proud to say I did 90% of the work myself, including assembling, installing and tuning the engine. I did have to out source most of the fab work because I don't weld, etc. But I can wrench on it, tune it, do the electrical mods myself, etc.
Click here ---> http://www.cardomain.com/ride/225656 for the home page for the car. There are a couple of pages showing my oil cooler and fuel system mods.
Also click here --> http://www.mitsustyle.com/forums/showthread.php?t=16155 for my intercooler and exhaust system fabrication.
I'm a long time moderator for MitsuStyle.com
I go by 1ViciousGSX on the site.
Basically it's stock :icon_jokercolor:
ENGINE:
Magnus Motorsports Stage 4 1G 2.4 L 8.5:1 Long Rod short block (Ross/Pauter)
Magnus Motorsports Stage 3 1G cylinder head (Supertech components, Cometic HP, A1 H-11 studs)
Magnus Motorsports sheet metal intake
Magnus Motorsports 1G/2G install kit
Forced Performance FP4R cams
Fidanza adjustable cam gears
Concept Racing solid lash adjusters (16)
1G external oil cooler/oil filter housing
Setrab 119FP8 fan-pack oil cooler
-8 braided stainless steel lines from housing to cooler and back
Jaz mini breather catch can
FUEL:
Bosch -044 fuel pump (330 lph @ 75 psi)
VPE big bore fuel rail
Earls -8 1-way check valve @ inlet to the fuel rail
FIC 1240cc Ball/Disc injectors
Aeromotive A1000-6 1:1 AFPR
Aeromotive 12301 fuel filter
-8 braided steel line from the screen pick-up to the fuel rail
-6 braided steel line from the fuel rail to the AFPR
-4 braided steel line from the AFPR to the return line
1G throttle body/2G TPS
Fuel pump re-wire w/10 gauge wire
FUEL MANAGEMENT:
DSMLink v2/2.5 client software
MafTranslator v1.36
3.5 inch LS1 maf
AEM UEGO wide-band controller w/add-on a/f gauge
IGNITION:
AEM C2DI
Buschur Racing COP
93-94 Hall Effect CAS
TURBO:
HKS TO4Z turbo
VPE S/S tubular manifold
Tial 44mm wastegate
Tial 50mm BOV
GReddy Profec Type-s boost controller
Garrett/PTE 24x12x4 FMIC w/custom tanks & piping
Dejon Tools 4" intake pipe
TRANSMISSION:
TRE race prepped transmission
Speed Design 4-spider center diff
Torrington bearing mod @ center diff
3-4 hub sleeve upgrade
Cryo treatment on all hard parts
B&M short shifter
CLUTCH:
Clutch Masters 2500lb pressure plate
Clutch Masters ceramic 4-puck sprung hub disc
Clutch Masters billet aluminum flywheel w/steel face
COOLING:
Fluidyne radiator
Fal Twin-line fans
160 deg thermostat
EXHAUST:
VPE 3 inch downpipe
Custom 3.5 inch exhaust
Borla XR-1 3.5 muffler
Dynomax 3.5 Bullet resonators (x2)
SUSPENSION/HANDLING:
Eibach Pro-kit 1" springs which have been cut to lower the car a total of 2 inches
KYB AGX 4-way adjustable shocks
Ingalls adjustable camber kits at all four wheels
Front/Back strut tower bars
18x8 Rays Engineering/Volk Racing AV3 wheels
Nitto NT555 225/40ZR18 tires
Metal Master brake pads
EXTERIOR:
HID Xenon headlamps w/ballast & igniters
PIAA Ion fog lamp bulbs
Clear corner lamps w/amber bulbs
Vehicle has been de-badged
INTERIOR:
MOMO shift knob
Red interior lamp bulbs
Super Green neon needle kit installed at instrument cluster gauges
Windows tinted w/Graphite tinting 20% rear - 35% quarter glasses - 50% door glasses
Since Doc knows what makes a GT-R so special, I'm sure he'll appreciate what I'm posting here.
Here it is:
1999 Mitsubishi Eclipse GSX (AWD)
Best E.T. so far:

11.45 @ 125.08 mph 22 psi on 93 pump gas, all 3510 lbs of it.
1.72 60-ft
Driven to the track and back home in full street trim. Car is set-up for 40 psi of boost on C-16 fuel. I need to up size my turbo exhaust housing to releave some excessive back pressure and then it will be a 10 second street car with a/c, all the options and a big, bad ass stereo.
I know you're going to ask :icon_jokercolor: It's putting down about 535 AWDWHP (all wheel drive horse power to the ground).

I'm proud to say I did 90% of the work myself, including assembling, installing and tuning the engine. I did have to out source most of the fab work because I don't weld, etc. But I can wrench on it, tune it, do the electrical mods myself, etc.
Click here ---> http://www.cardomain.com/ride/225656 for the home page for the car. There are a couple of pages showing my oil cooler and fuel system mods.
Also click here --> http://www.mitsustyle.com/forums/showthread.php?t=16155 for my intercooler and exhaust system fabrication.
I'm a long time moderator for MitsuStyle.com
I go by 1ViciousGSX on the site.
Basically it's stock :icon_jokercolor:
ENGINE:
Magnus Motorsports Stage 4 1G 2.4 L 8.5:1 Long Rod short block (Ross/Pauter)
Magnus Motorsports Stage 3 1G cylinder head (Supertech components, Cometic HP, A1 H-11 studs)
Magnus Motorsports sheet metal intake
Magnus Motorsports 1G/2G install kit
Forced Performance FP4R cams
Fidanza adjustable cam gears
Concept Racing solid lash adjusters (16)
1G external oil cooler/oil filter housing
Setrab 119FP8 fan-pack oil cooler
-8 braided stainless steel lines from housing to cooler and back
Jaz mini breather catch can
FUEL:
Bosch -044 fuel pump (330 lph @ 75 psi)
VPE big bore fuel rail
Earls -8 1-way check valve @ inlet to the fuel rail
FIC 1240cc Ball/Disc injectors
Aeromotive A1000-6 1:1 AFPR
Aeromotive 12301 fuel filter
-8 braided steel line from the screen pick-up to the fuel rail
-6 braided steel line from the fuel rail to the AFPR
-4 braided steel line from the AFPR to the return line
1G throttle body/2G TPS
Fuel pump re-wire w/10 gauge wire
FUEL MANAGEMENT:
DSMLink v2/2.5 client software
MafTranslator v1.36
3.5 inch LS1 maf
AEM UEGO wide-band controller w/add-on a/f gauge
IGNITION:
AEM C2DI
Buschur Racing COP
93-94 Hall Effect CAS
TURBO:
HKS TO4Z turbo
VPE S/S tubular manifold
Tial 44mm wastegate
Tial 50mm BOV
GReddy Profec Type-s boost controller
Garrett/PTE 24x12x4 FMIC w/custom tanks & piping
Dejon Tools 4" intake pipe
TRANSMISSION:
TRE race prepped transmission
Speed Design 4-spider center diff
Torrington bearing mod @ center diff
3-4 hub sleeve upgrade
Cryo treatment on all hard parts
B&M short shifter
CLUTCH:
Clutch Masters 2500lb pressure plate
Clutch Masters ceramic 4-puck sprung hub disc
Clutch Masters billet aluminum flywheel w/steel face
COOLING:
Fluidyne radiator
Fal Twin-line fans
160 deg thermostat
EXHAUST:
VPE 3 inch downpipe
Custom 3.5 inch exhaust
Borla XR-1 3.5 muffler
Dynomax 3.5 Bullet resonators (x2)
SUSPENSION/HANDLING:
Eibach Pro-kit 1" springs which have been cut to lower the car a total of 2 inches
KYB AGX 4-way adjustable shocks
Ingalls adjustable camber kits at all four wheels
Front/Back strut tower bars
18x8 Rays Engineering/Volk Racing AV3 wheels
Nitto NT555 225/40ZR18 tires
Metal Master brake pads
EXTERIOR:
HID Xenon headlamps w/ballast & igniters
PIAA Ion fog lamp bulbs
Clear corner lamps w/amber bulbs
Vehicle has been de-badged
INTERIOR:
MOMO shift knob
Red interior lamp bulbs
Super Green neon needle kit installed at instrument cluster gauges
Windows tinted w/Graphite tinting 20% rear - 35% quarter glasses - 50% door glasses