Planning a non-Warmoth build chock full of Paul Gilbert goodness

[Hodgo]

Can’t get this duplicator to shoot nicely for the metallic

 

[Hodgo]

I got one can of color left so I’m going to try knocking down this with some 600grit and then I’m going to pray

 

[JohnnyHardtail]

Do you warm up the cans in a tub of warm water before you spray?

 

[Hodgo]

Do you warm up the cans in a tub of warm water before you spray?

I do, yeah. The primer was nice and easy

 

[Strat Avenger]

I want one.

 

[Hodgo]

 

[Hagwood]

View attachment 67044

A little hard to tell with the reflection, but it looks like that went down good. That's going to be killer !

 

[Hodgo]

Ugh as I look again I spaced the left f hole on edge to vinyl not vinyl to pickups. Terrified to see what happens if I try to lift this vinyl and move it

 

[Spud]

Ugh as I look again I spaced the left f hole on edge to vinyl not vinyl to pickups. Terrified to see what happens if I try to lift this vinyl and move it

I would pull it up from the arm cut. The adhesive is probably water based and MAY come off without damaging the blue. Dunno

 

[Hodgo]

I would pull it up from the arm cut. The adhesive is probably water based and MAY come off without damaging the blue. Dunno

Will give it a go. At this point if I end up pulling up finish I’m taking a winter hiatus on this project