Leaderboard

Orange Peel On My Tele

BillyBoy

Junior Member
Messages
85
I've been wet sanding the clear coat on my Tele a lot to get out the orange peel. Here's some of it near the pickup route where the light is shining. It's deeper in other areas.

Will it help if I just spray more clear on it?

Thanks!
 

Attachments

  • orange peel.JPG
    orange peel.JPG
    90.8 KB · Views: 326
No you have to get that stuff level with the wet dry paper. The only time you need to add more finish is if you burn through.
 
Tonar8353 said:
No you have to get that stuff level with the wet dry paper. The only time you need to add more finish is if you burn through.

Okay, but since I do have a spot where I burned through I might as well spray the whole thing, right? I have to let it cure for another two weeks anyhow so more coats would be even better, right?
 
No, more coats are not necessarily better; shoot the burn through with about 4 coats and then after you have done that shoot the whole thing with one full wet coat. You will then have to let it set for a couple of more weeks to cure.

 
Tonar8353 said:
No, more coats are not necessarily better; shoot the burn through with about 4 coats and then after you have done that shoot the whole thing with one full wet coat. You will then have to let it set for a couple of more weeks to cure.

Got it. Thanks Tonar!
 
Back
Top