New video: vintage vs modern Tele bridge

[aarontunes]

Check it out:

 

[Spud]

Check it out:

I like to keep two kits one metric one SAE of stainless grub screws in various sizes/ lengths so I never have a proud hand grinder. Also, your playing is always so impeccably clean, and that makes me angry!!

 

[aarontunes]

.....proud hand grinder

Dibs on this band name!

 

[JohnnyHardtail]

The bridge plate material is different, ie. brass vs steel, so there is probably some high end difference in the pickup tone.

 

[ghostrider]

Interesting. There was a much bigger difference than I would've guessed.

The real question though is would there be an even bigger difference in a more versatile mix of Van Halen riffs? Sadly, I guess we'll never know.

 

[ghostrider]

I like to keep two kits one metric one SAE of stainless grub screws in various sizes/ lengths so I never have a proud hand grinder. Also, your playing is always so impeccably clean, and that makes me angry!! View attachment 67582

Brilliant idea. What are the typical sizes of grub screws on saddles? I have a couple slightly proud grinders.

 

[Spud]

Brilliant idea. What are the typical sizes of grub screws on saddles? I have a couple slightly proud grinders.

I believe metric is M3 4mm,6mm,8mm, my SAE set isn't right in front of me, so I can't recall that size. Amazon sells the sets for reasonable dough.

 

[Spud]

Get yours today and tell em Spud sent ya! Also Large Marge!

 

[aarontunes]

Also Large Marge!

And when they pulled the driver's body from the twisted, burning wreck....

 

[TonyFlyingSquirrel]

And when they pulled the driver's body from the twisted, burning wreck....

“Special Guest” or “Free Beer”….

 

[Ernst Johann]

Well, always using the gotoh modern bridge with Highwood saddles, and yes, these grub screws are annoying.
And, gotoh is metric, but, for a callaham and a hipshot i had to buy imperial screws, also annoying.

Btw. i'm prefering the saddles due to intonation, so i'm surprised this wasn't an issue...

 

[Strat Avenger]

Btw. i'm prefering the saddles due to intonation, so i'm surprised this wasn't an issue...

I thought the 3-saddle was compensated (?).

 

[JohnnyHardtail]

Every set of strings may require different intonation setting. I’m not sure how much difference there would be for a set of 9s, 10s, 11s, 12-60, Baritone set, etc. or whatever people wish to use.

 

[Ernst Johann]

I thought the 3-saddle was compensated (?).

You are right, these Gotoh saddles are compensated:
"
Built-in compensation
Unique grooves molded into these saddles move each string's point of contact for more exact intonation than traditional barrel saddles.
"
Never tried these, couldn't intonate easily with the traditional saddles, thats why i became a fan of "one saddle per string".

 

[mycroftxxx]

You are right, these Gotoh saddles are compensated:
Built-in compensation
Unique grooves molded into these saddles move each string's point of contact for more exact intonation than traditional barrel saddles.

I know that lots of people like the Gotoh In-Tune saddles, and I started off with them on a Tele that I built a few years ago where I wanted the three-barrel bridge…but I was never able to get them satisfactorily intonated. I ended up buying some compensated saddles from Callaham, which worked like a charm. The Gotoh saddles obviously work for lots of people, but if you want another option, check out the Callaham options.

 

[Strat Avenger]

I know that lots of people like the Gotoh In-Tune saddles, and I started off with them on a Tele that I built a few years ago where I wanted the three-barrel bridge…but I was never able to get them satisfactorily intonated. I ended up buying some compensated saddles from Callaham, which worked like a charm. The Gotoh saddles obviously work for lots of people, but if you want another option, check out the Callaham options.

I have the Gotoh saddles for the Tele project that I haven't completed yet. I hope they're gonna intonate good. If not, it's good to know that I can switch to Callaham.