Meadowhawk body, neck, and inlays are now officially on the menu!

[supertruper1988]

https://imgur.com/0pw94GH

This is quickly becoming my favorite headstock shape on the Warmoth menu.

 

[Hagwood]

https://imgur.com/0pw94GH

This is quickly becoming my favorite headstock shape on the Warmoth menu.

I agree. I need to get one on order, but haven't decided on the wood yet. I'm thinking Wenge / Ebony to go with the Blue Dye.

 

[ThisIsHuhWow404]

@Hodgo The diagrams are very helpful for visualizing.

I think with the 3x3-05 and push-pull pots I can get

1: Neck Humbucker
2: Neck Humbucker + Middle
3: Bridge Humbucker + Middle
4: Bridge Humbucker + Neck Humcuker
5: Bridge Outer Coil + Neck Outer Coil
6: Bridge Humbucker

And then use two push pull pots to split the Humbuckers to the inner coils for the split and in-between sounds on 1, 2, 3, 4 & 6.

Which leads to the question, is there a such thing as a no load tone pot that clicks into bypass mode at 10, and has push-pull splitting capabilities? I think EVH may have made something like for their guitars, but never as an aftermarket part.

 

[supertruper1988]

https://imgur.com/9GtCAUs

Last one. This really is a great headstock shape

 

[supertruper1988]

By last one I meant lets do a few more

https://imgur.com/2WLH0jH

https://imgur.com/xbAHygS

 

[desertrider13]

Bet it would look good on a Z body.

 

[supertruper1988]

Bet it would look good on a Z body.

Some one els suggested a Musiclander as well. I will see if I can remember those when I am at my PC tomorrow

 

[supertruper1988]

actually there are none in stock of those right now. Anyone have a saved image of an in stock body of the Z, Musiclander, and Iceman?

 

[Hagwood]

actually there are none in stock of those right now. Anyone have a saved image of an in stock body of the Z, Musiclander, and Iceman?

The Z needs my ‘Gunslinger’ headstock…..

 

[Spud]

The Z needs my ‘Gunslinger’ headstock…..


View attachment 65195

I thought that was your "Mandy" headstock?

 

[Hagwood]

actually there are none in stock of those right now. Anyone have a saved image of an in stock body of the Z, Musiclander, and Iceman?

 

[Spud]

@Hodgo The diagrams are very helpful for visualizing.

I think with the 3x3-05 and push-pull pots I can get

1: Neck Humbucker
2: Neck Humbucker + Middle
3: Bridge Humbucker + Middle
4: Bridge Humbucker + Neck Humcuker
5: Bridge Outer Coil + Neck Outer Coil
6: Bridge Humbucker

And then use two push pull pots to split the Humbuckers to the inner coils for the split and in-between sounds on 1, 2, 3, 4 & 6.

Which leads to the question, is there a such thing as a no load tone pot that clicks into bypass mode at 10, and has push-pull splitting capabilities? I think EVH may have made something like for their guitars, but never as an aftermarket part.

You'll never remember all that!

 

[u.9]

Some one els suggested a Musiclander as well. I will see if I can remember those when I am at my PC tomorrow

I've already been spec'ing out one with the Meadowhawk neck, but I've got 3 other builds in progress and no wall or floor space left!

 

[ThisIsHuhWow404]

You'll never remember all that!

If I posted the dreams I had for a Fishman Fluence equipped HSH Jazzmaster build (with all 3 voices of every pickup, plus all of the High-Frequency Tilt and DB boost options accessible by microswitches, plus an accessible "out of phase/Peter Green mode" option available wired up in the Jazzmaster’s rhythm section) I’d probably get banned by the mods.

I’m going to make Jerry Garcia’s Wolf look like a $200 Epiphone one of these days.

 

[Wolff05]

actually there are none in stock of those right now. Anyone have a saved image of an in stock body of the Z, Musiclander, and Iceman?

 

[desertrider13]

https://imgur.com/9GtCAUs

Last one. This really is a great headstock shape

Alright, new guy question. How are you able to put the necks on the bodies? In pictures, I know how in real life. Remember I went to school with a slide rule. Thanks all.

 

[aarontunes]

Alright, new guy question. How are you able to put the necks on the bodies? In pictures, I know how in real life. Remember I went to school with a slide rule. Thanks all.

The photos of necks and bodies together that you're seeing in this thread are being done in photoshop (et al) by forumites, outside of and apart from the Warmoth website.

The Warmoth website doesn't (and can't, per our license with Fender) facilitate any kind of visual builder that pairs necks with bodies.

 

[desertrider13]

thank you. Makes sense. Now I know

 

[supertruper1988]

Alright, new guy question. How are you able to put the necks on the bodies? In pictures, I know how in real life. Remember I went to school with a slide rule. Thanks all.

As Aaron said, I am doing this in photoshop.

 

[supertruper1988]

*pics*

Awesome thank you!