Luminlay Side Dots

[ghostrider]

I'm considering retrofitting some Luminlay side dots on an existing Warmoth neck(s), but I'm not sure what diameter dots I should order.

1. Does anyone know what size the standard side dots are on a Warmoth neck?
2. Is it advisable to install the same size as that or is it recommended to size up?

 

[Scott]

The side dots on my Warmoth neck are about 2mm. I eyeballed with calipers and also compared to some 2mm side dot stock I have. I would upsize just so my new hole could be a few microscopes off center and still cover the current dot. It looks like the luminlay side dots min size is 2.5mm so you have to up size.

 

[Scott]

The side dots on my Warmoth neck are about 2mm. I eyeballed with calipers and also compared to some 2mm side dot stock I have. I would upsize just so my new hole could be a few microscopes off center and still cover the current dot. It looks like the luminlay side dots min size is 2.5mm so you have to up size.

Sorry, I was looking at the black piped side dots that were min 2.5mm. They do go down to 1.5mm. If it were me, I would up size.

 

[J-Bones]

Standard white/black side dots are 2mm diameter while the Luminlay is 3mm outer + 2mm inner diameter. And Moon Glow is 3mm, for completionists.

 

[ghostrider]

Thank you!