Leaderboard

Last Waltz Tribute limited run is now live!

Well GAS has subsided. After doing some serious time listening to the Last Waltz as well as with my Penguin now that I have Zoom-Trons in it: I'm over 85% to that bridge tone. It's not quite as bright, but its close enough in a mix.

A Zoom-Tron is a humbucker that uses magnet poles (cylinders ala Fender) vs a bar magnets underneath.
 
Here's some pics:

Fired up the router. Decided on a 'partial swimming pool' route. Perhaps we need a name for this: I propose "Hot Tub Route" :)

IMG_20260313_160051_285LoRes.jpg


Cut a larger opening for the wiring. After routing I found that the body was chambered! Completely forgot about that...

IMG_20260313_160057_621LoRes.jpg

Seems to fit...

IMG_20260313_160142_914LoRes.jpg

Finished:
IMG_20260313_164317_634LoRes.jpg


IMG_20260313_164322_638LoRes.jpg
 
Update: I was finding the tone of the bridge 'pickup' too dark, so I swapped the pots with 500k versions. Also installed a treble bleed. Better, but not quite the way I like it yet. But please understand - I typically play a telecaster :-0
 
Update: I was finding the tone of the bridge 'pickup' too dark, so I swapped the pots with 500k versions. Also installed a treble bleed. Better, but not quite the way I like it yet. But please understand - I typically play a telecaster :-0
I have used 500k pots with a parallel resistor on the switch when mixing humbuckers and single coils, to “show” the HB the full load and the SCs… less... Could such a confguration with 1megs and a 500-or-so-k resistor be an option? 1meg for the bridge HB alone, to brighten it up, knocked down for the others? I don’t remember if you said how you have the pickup selector wired, might take a super switch. Never tried it with 1megs, but it seems like it could produce some kind of results 🤷🏻‍♂️
 
Back
Top