Guyker Tunomatic Bridge with Roller Saddles.

[TonyFlyingSquirrel]

Has anyone used these?
I have a customer requesting one, but I’m hesitant as I envision these rollers just falling off and getting lost, just for him to upgrade to a more standard Tuno, or full tilt for the Schaller which has the pins protected from falling out.

Pardon Our Interruption...

 

[Spud]

Has anyone used these?
I have a customer requesting one, but I’m hesitant as I envision these rollers just falling off and getting lost, just for him to upgrade to a more standard Tuno, or full tilt for the Schaller which has the pins protected from falling out.

Pardon Our Interruption...

Tony have one and it works fine.

 

[TonyFlyingSquirrel]

Thanks Spud, so the rollers and spindles don’t fall off if the bridge is flipped over during a restring?
That’s the main concern. Had that happened with some GFS roller saddles that retro’d a customer Tele by request,just for them to have to go back to the old saddles. Found better ones later, but still, want to prevent more work later.

 

[Spud]

Thanks Spud, so the rollers and spindles don’t fall off if the bridge is flipped over during a restring?
That’s the main concern. Had that happened with some GFS roller saddles that retro’d a customer Tele by request,just for them to have to go back to the old saddles. Found better ones later, but still, want to prevent more work later.

I haven't had that happen, but I don't play that one a lot. I think they are captured somehow

 

[TonyFlyingSquirrel]

I haven't had that happen, but I don't play that one a lot. I think they are captured somehow

Thank you kind sir,very helpful indeed!

 

[TonyFlyingSquirrel]

Thanks again Spud, ordered.

 

[TonyFlyingSquirrel]

It arrived today, overall a really nice build.
Only issue I see is the keeper screws that lock the bridge to the posts don’t appear to be tapped all the way into the hole to allow the screw to lock onto the post with adequate tension to keep it from falling off the posts if you were to flip the guitar over with no strings on it. It just barely pokes into that area. The overall bridge quality aside from that is quite nice, and the rollers are secured nicely as well.

 

[Spud]

It arrived today, overall a really nice build.
Only issue I see is the keeper screws that lock the bridge to the posts don’t appear to be tapped all the way into the hole to allow the screw to lock onto the post with adequate tension to keep it from falling off the posts if you were to flip the guitar over with no strings on it. It just barely pokes into that area. The overall bridge quality aside from that is quite nice,many the rollers are secured nicely as well.

I am glad you mostly like it!