Steve St.Laurent
Senior Member
- Messages
- 238
Has Warmoth considered putting together a number of "fit kits" that if a person was looking to purchase a neck you could call and rent the "kit" - for whatever the cost would be to replicate it if they don't return it. Then when they return the kit get a full refund. You could put a partial neck of each neck profile in there - put all of the different frets on the necks, all of the different inlays, several different woods, etc. If there was no truss rod in there and there was only about 10 or 15 inches of the neck that should give enough to get the feel down. I know I would have gone this route so i could see all of the different necks - I just went with the standard thin to be safe.