MarcusLA1959
Junior Member
- Messages
- 35
I'm going to install a waterslide decal on a roasted maple neck. I have sanded the headstock and applied Mohawk ez vinyl sealer.
I then sanded again.
My question is, can I apply the decal on top of the ez vinyl sealer on the headstock and spray lacquer over the decal, or should I put down a mist coat of lacquer. Then put the decal on?
I then sanded again.
My question is, can I apply the decal on top of the ez vinyl sealer on the headstock and spray lacquer over the decal, or should I put down a mist coat of lacquer. Then put the decal on?