Custom neckplate

[DangerousR6]

Hey doug! How should I clean that product that you put on my plate? only +1 hour and I'll see if my super glue or the epoxy looked better in a stainless stell bar... then should put in on the plate :icon_thumright:

Use alcohol...

 

[Wana_make_a_guitar]

Hey doug! How should I clean that product that you put on my plate? only +1 hour and I'll see if my super glue or the epoxy looked better in a stainless stell bar... then should put in on the plate :icon_thumright:

Use alcohol...

Yes, but only for the plate :laughing7:

 

[Nando Vallart]

ccasion14: :evil4:

 

[Nando Vallart]

News :tard:

Well, don't know how is the epoxy you have there (StewMac can't sell me) but the only one I find it not "liquid" as super glue... it's more like vaseline.... so I could not just put it on the routed parts...  :sad: The letters was impossible to fill alone, so I had to put it on the whoooooole plate... Hope it don't ent TOO funky in the end

If it ends, I'll have to order another plate for you Doug and if your epoxy is liquid, will have to ask to you put it on the plate...
I really hate live here... can't find ANYTHING... not even 0000 steel wool... the most thin I've found is 00...  :help:

 

[DangerousR6]

News :tard:

Well, don't know how is the epoxy you have there (StewMac can't sell me) but the only one I find it not "liquid" as super glue... it's more like vaseline.... so I could not just put it on the routed parts...  :sad: The letters was impossible to fill alone, so I had to put it on the whoooooole plate... Hope it don't ent TOO funky in the end

If it ends, I'll have to order another plate for you Doug and if your epoxy is liquid, will have to ask to you put it on the plate...
I really hate live here... can't find ANYTHING... not even 0000 steel wool... the most thin I've found is 00...  :help:

Hmmmmm, well that's messed up. But I really don't think you have to epoxy the style I made you. I've made several for Doc that way and he's said nothing in reguards to any problems with his.. :dontknow:

 

[Nando Vallart]

Hmmmmm, well that's messed up. But I really don't think you have to epoxy the style I made you. I've made several for Doc that way and he's said nothing in reguards to any problems with his.. :dontknow:

Well, it had a big "steel at atmosfere" part... I live 200m from the beach, the air is very salty and wet, my sound system start to have "bad contact" in about a month after I came live here... and the circuit is closed under plastic... so, I think I had to put it at least in the steel part... Went to see just now and I think it will look like someone (me  :laughing7 put transparent jelly on it  :laughing3: But ok :doh:

 

[DangerousR6]

Hmmmmm, well that's messed up. But I really don't think you have to epoxy the style I made you. I've made several for Doc that way and he's said nothing in reguards to any problems with his.. :dontknow:

Well, it had a big "steel at atmosfere" part... I live 200m from the beach, the air is very salty and wet, my sound system start to have "bad contact" in about a month after I came live here... and the circuit is closed under plastic... so, I think I had to put it at least in the steel part... Went to see just now and I think it will look like someone (me  :laughing7 put transparent jelly on it  :laughing3: But ok :doh:

In that case it's probably a good idea to coat it...... :icon_thumright:

 

[DangerousR6]

Time to revive my thread, here's a plate i made for dmraco....Plus I'm working on a second one for him...

 

[DocNrock]

News :tard:

Well, don't know how is the epoxy you have there (StewMac can't sell me) but the only one I find it not "liquid" as super glue... it's more like vaseline.... so I could not just put it on the routed parts...  :sad: The letters was impossible to fill alone, so I had to put it on the whoooooole plate... Hope it don't ent TOO funky in the end

If it ends, I'll have to order another plate for you Doug and if your epoxy is liquid, will have to ask to you put it on the plate...
I really hate live here... can't find ANYTHING... not even 0000 steel wool... the most thin I've found is 00...  :help:

Hmmmmm, well that's messed up. But I really don't think you have to epoxy the style I made you. I've made several for Doc that way and he's said nothing in reguards to any problems with his.. :dontknow:

The black ones have had no issues, but I'll probably shellac them next time I change strings. 

 

[DangerousR6]

News :tard:

Well, don't know how is the epoxy you have there (StewMac can't sell me) but the only one I find it not "liquid" as super glue... it's more like vaseline.... so I could not just put it on the routed parts...  :sad: The letters was impossible to fill alone, so I had to put it on the whoooooole plate... Hope it don't ent TOO funky in the end

If it ends, I'll have to order another plate for you Doug and if your epoxy is liquid, will have to ask to you put it on the plate...
I really hate live here... can't find ANYTHING... not even 0000 steel wool... the most thin I've found is 00...  :help:

Hmmmmm, well that's messed up. But I really don't think you have to epoxy the style I made you. I've made several for Doc that way and he's said nothing in reguards to any problems with his.. :dontknow:

The black ones have had no issues, but I'll probably shellac them next time I change strings. 

Any with the chrome or gold?

 

[DangerousR6]

Here's a couple more for the pile. These are for dmraco.....

 

[dmraco]

Here's a couple more for the pile. These are for dmraco.....

you beat me too it!!!!  Top notch...EXACTLY what I wanted.  My Warmoths are now complete!!!

 

[DangerousR6]

Here's a couple more for the pile. These are for dmraco.....

you beat me too it!!!!  Top notch...EXACTLY what I wanted.  My Warmoths are now complete!!!

:icon_biggrin:

 

[Garrett]

Sending you an email, this stuff looks awesome!

 

[DangerousR6]

Sending you an email, this stuff looks awesome!

Thanks Garrett, you have a reply coming....

 

[DangerousR6]

Sending you an email, this stuff looks awesome!

Hey Garrett.....Dangerous Designs has something for you.... :laughing7:

 

[line6man]

Hey DR6,
i noticed that parts of my neckplate have a copper look under the right light.
it looks like the machine didnt cut deep enough to fully scrape thru the copper layer under the chrome.

is there anything that i can do to scrape those parts out or something?

 

[DangerousR6]

Hey DR6,
i noticed that parts of my neckplate have a copper look under the right light.
it looks like the machine didnt cut deep enough to fully scrape thru the copper layer under the chrome.

is there anything that i can do to scrape those parts out or something?

Hmmmm, which one was it? And is it in the lettering? If it is in some lettering you could get a little pointy round file called a Riffler file and gently file thru the copper.But I would suggest you tape off any surrounding area to prevent scratching if you slip....

 

[line6man]

Hey DR6,
i noticed that parts of my neckplate have a copper look under the right light.
it looks like the machine didnt cut deep enough to fully scrape thru the copper layer under the chrome.

is there anything that i can do to scrape those parts out or something?

Hmmmm, which one was it? And is it in the lettering? If it is in some lettering you could get a little pointy round file called a Riffler file and gently file thru the copper.But I would suggest you tape off any surrounding area to prevent scratching if you slip....

http://www.flickr.com/photos/28212214@N05/2779171611/

its on the P and H on Joseph, and the D is DeSimone

 

[DangerousR6]

Hey DR6,
i noticed that parts of my neckplate have a copper look under the right light.
it looks like the machine didnt cut deep enough to fully scrape thru the copper layer under the chrome.

is there anything that i can do to scrape those parts out or something?

Hmmmm, which one was it? And is it in the lettering? If it is in some lettering you could get a little pointy round file called a Riffler file and gently file thru the copper.But I would suggest you tape off any surrounding area to prevent scratching if you slip....

http://www.flickr.com/photos/28212214@N05/2779171611/

its on the P and H on Joseph, and the D is DeSimone

You got it mounted on a guitar yet?