rightintheface
Senior Member
- Messages
- 326
so i've decided to go with the avatar 2x12 cab (not sure what cosmetic details yet, perhaps burgundy and oxblood with silver piping) over the mesa vs orange thread i started the other day. this will be my first cab purchase, i've been playing combos for a few years, so don't really know what would be "best" to go for in terms of what ohm rating i choose for the cab.
i'm running a 50w Hughes and Kettner switchblade combo. the plan was to hook the 2x12 into one of the speaker outputs, and still run the combo's speaker.
the outputs are: 1x 4 Ohms, 1x 8 Ohms or 2x 16 Ohms, and 1x 16 Ohms. the combo speaker (eminence rockdriver 60) is connected to one of the outputs labelled under "1x 8 Ohms or 2x 16 Ohms", and i'm not sure what rating it is. the standard avatar cabs are 8ohm, but can be ordered in 4 or 16 ohms.
to be honest, i have absolutely no idea which i should get :-\ i am a complete noob when it comes to cabs/ohms etc etc
i'm also keen to add another 2x12 further down the line. the cabs can be daisychained and attached to half the ohm output ie. 2x 8 ohm cabs daisychained connect to a 4ohm output.
any suggestions or comments? :dontknow:
i'm running a 50w Hughes and Kettner switchblade combo. the plan was to hook the 2x12 into one of the speaker outputs, and still run the combo's speaker.
the outputs are: 1x 4 Ohms, 1x 8 Ohms or 2x 16 Ohms, and 1x 16 Ohms. the combo speaker (eminence rockdriver 60) is connected to one of the outputs labelled under "1x 8 Ohms or 2x 16 Ohms", and i'm not sure what rating it is. the standard avatar cabs are 8ohm, but can be ordered in 4 or 16 ohms.
to be honest, i have absolutely no idea which i should get :-\ i am a complete noob when it comes to cabs/ohms etc etc
i'm also keen to add another 2x12 further down the line. the cabs can be daisychained and attached to half the ohm output ie. 2x 8 ohm cabs daisychained connect to a 4ohm output.
any suggestions or comments? :dontknow: