Leaderboard

3/4 jack rout

juwel1998

Senior Member
Messages
212
Hey all you advanced members,

I couldn't resist the Thanksgiving Sale at all. I ordered a 7/8 T-style body, with silver radiant finish.
It will have a 3/4 jack rout side jack hole.
I had laid my eyes on that particular body for quite a while.

Now my question:  I cannot seem to find a jack I can use from the Warmoth site. Could you guys
                              be so kind and help me out here?  I am completely lost.

Sorry, no pic's..............yet, but they will come.

Bye  JULIA
 
A normal jack with a square or 'football' plate will work, as would an Electrosocket.  Congrats on the buy and looking forward to the build!
 
Please note that the regular necks will not work with the 7/8 bodies. You will need to order a 7/8 scale neck when you are ready to purchase that part.
 
Hello AutoBat,

thanks a lot for reminding me. It's the 7/8 Warmoth Warhead. 24 frets...... :icon_biggrin: :toothy10: lovin' it already.


Bye  JULIA


 
To actually answer your question, you have two options that I know of:
First is http://www.warmoth.com/Football-Side-Jack-Plate-Chrome-P818C68.aspx
FBJ1C.jpg


Second is http://www.warmoth.com/Square-Side-Jack-Plate-Chrome-P841C68.aspx
SJP1C.jpg


Either one with work. Just stick an output jack or long jack in the opening!
 
Hey AutoBat,

what about the electrosocket that whitebison66 mentioned.
I thought the hole itself is only that wide 3/4" (19.05 mm), did I misunderstand?


Bye  JULIA
 
I didn't even notice WhiteBison's post.
The electrosockets Warmoth sells are for 7/8" holes (according to the description)
I do not believe they would work with 3/4"
 
Hello AutoBat,

if I remember correctly, the long jacks and the jacks don't have that size either. They either have 1/2" or 7/8".
I didn't see a output jack/long jack that will fit the 3/4" hole.

Am I wrong, did I overlook something?


Bye  JULIA
 
Julia,
You probably want this jack:
http://www.warmoth.com/Mono-Jack-By-Switchcraft-P122C68.aspx
It's the jack they've been using pretty much since they invented the phone plug. It will work with either jack plate, the football shaped one or the square plate.

Hope this helps!
 
whitebison66 said:
A normal jack with a square or 'football' plate will work, as would an Electrosocket.  Congrats on the buy and looking forward to the build!

Electrosocket expects a 7/8" hole.
 
Hello everybody......

OK the hole on that body is 3/4" wide

and all that Warmoth offers is  1/2", 3/8" or 7/8" wide.

What can I do about that dilemma?


Bye  JULIA
 
Hi again. Just responded to your PM. You are getting the inch-fraction to cm conversion wrong. Please refer to this chart:

http://www.metricamerica.com/convert%20fractions%20to%20centimeters.htm
 
Back
Top