what happened to the 1.75" nut width?

[Steve_Karl]

Hey there,

I was just looking at strat necks and am not seeing the 1.75" ( 1-3/4") nut with being available?

It still shows in the "more info" area but not in the drop down menu to make a choice.

What's up with that?

 

[Fat Pete]

Which drop down do you mean? I'm seeing plenty in stock and the option is there on the builder.

 

[stratamania]

Plenty of them here...1.75 = 1 3/4"

https://www.warmoth.com/Pages/ClassicShowcase.aspx?Body=1&Shape=1&Path=Strat&nutWidth=6

 

[Steve_Karl]

Sorry folks ... my mistake.
I have to choose options from the top down ... not just look at the nut widths alone.

Problem Solved!

 

[stratamania]

Sorry folks ... my mistake.
I have to choose options from the top down ... not just look at the nut widths alone.

Problem Solved!

Glad the problem is solved but I am not sure what you mean from the top down as you can also choose the nut width prior to choosing a neck type. e.g. the link below will give you all necks with a 1 3/4" width.

https://www.warmoth.com/Pages/ClassicShowcase.aspx?Body=1&Path=Spotlight&nutWidth=6

 

[Steve_Karl]

Sorry folks ... my mistake.
I have to choose options from the top down ... not just look at the nut widths alone.

Problem Solved!

Glad the problem is solved but I am not sure what you mean from the top down as you can also choose the nut width prior to choosing a neck type. e.g. the link below will give you all necks with a 1 3/4" width.

https://www.warmoth.com/Pages/ClassicShowcase.aspx?Body=1&Path=Spotlight&nutWidth=6

I was in the build from scratch area
but thanks for that tip

 

[stratamania]

Sorry folks ... my mistake.
I have to choose options from the top down ... not just look at the nut widths alone.

Problem Solved!

Glad the problem is solved but I am not sure what you mean from the top down as you can also choose the nut width prior to choosing a neck type. e.g. the link below will give you all necks with a 1 3/4" width.

https://www.warmoth.com/Pages/ClassicShowcase.aspx?Body=1&Path=Spotlight&nutWidth=6

I was in the build from scratch area
but thanks for that tip

Got it. Top down does seem to apply in that case...