jackthehack
Epic Member
- Messages
- 5,630
Did the amp head always have the buzz, or did it develop? Suddenly?
vibration in head
- Thread starter dbw
- Start date
jackthehack
Epic Member
- Messages
- 5,630
Looking back over the thread, you said: "I could mostly stop it with a pencil's eraser on the middle preamp tube. I pulled that tube and reseated it and the buzz is still there but a lot quieter."
For $8-10 bucks you can replace that tube, might try that as a first step....
For $8-10 bucks you can replace that tube, might try that as a first step....
jackthehack
Epic Member
- Messages
- 5,630
-CB- said:
That would prove it out; but the noise would still be there... Hard to tell without hearing the sound it's making, but a while back I picked up a older Peavy Classic 50 with a similar issue for cheap, put a new set of pre-amp tubes in it and voila!
spauldingrules
Hero Member
- Messages
- 722
How about turning the amp OFF and playing a stereo loudly underneath it, and then holding things in there to find out what is rattling?
