Toronado bridge saddle screw sizes?

[ScottDR]

Anybody know what the saddle height and intonation screw thread sizes are on the Fender Toronado bridge (made in Mexico) that Warmoth sells? I don't have thread gages that small to measure for myself and my local hardware store has nothing that small. Planning to replace the originals with stainless on my Duo-Sonic build. I assume they are metric......

 

[Spud]

Anybody know what the saddle height and intonation screw thread sizes are on the Fender Toronado bridge (made in Mexico) that Warmoth sells? I don't have thread gages that small to measure for myself and my local hardware store has nothing that small. Planning to replace the originals with stainless on my Duo-Sonic build. I assume they are metric......

I do not know, but they are inexpensive so get a couple sets of eachon the zon.

 

[ScottDR]

I've narrow them down to M3 x 0.5-15mm or #4-48 x 9/16" for the intonation screws......

 

[elJefe]

I actually don't own an imperial thread gage, but looking at my Toronado bridge it appears that both the saddle height and intonation screws are M3 x 0.5. The saddle height screws appear to be 10mm long. The intonation screws are ~ 16mm long. Regardless, be very careful not to cross-thread the screws as these are very fine pitch and replacement stainless screws will be harder than the soft steel stamped saddles.