Seeking guidance in humbucker wiring

[NowhereMan]

My latest project is a Strat with 2 humbuckers, 1 volume, 1 tone and a Strat-style 3 way switch.  The pickups are a SD 59 Trembucker for the bridge and a regular 59 for the neck.  The neck pickup is on order and I just noticed that it's not a 4 conductor like my Trembucker.  Is this going to be a problem?  I've studied numerous diagrams and haven't found one for this particular set up; they all show 4 conductors for the neck.  Cash and prizes to whomever can describe or draw what this wiring job is going to look like.

 

[jackthehack]

Use this SD Tele diagram and you'll be good to go:

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=tele_2hum

 

[GoDrex]

For the single conductor pickup - just follow the above diagram and hook the black wire where the black is shown and connect the braided shield wire covering to ground.

 

[Super Turbo Deluxe Custom]

Ditto what Jack said for the wiring diagram.  For SD, solder and tape the red and white together for series out-of-phase.  The black and green are your leads.

 

[JamesL]

I've always used the duncan wiring diagrams...