Razor Blades and Frets

[slowhandy]

I've heard that a razor blade can be used to remove the poly/lacquer from the frets on a maple fretboard.  Can anyone tell me exactly how this is done?

Thanks.

 

[whyachi]

I think this is the video you need, but I can't play it at work.. it might be part #16 or #18.
http://www.youtube.com/watch?v=jqCU9pD5B0w

 

[-CB-]

I use a 10d nail head, with a little half moon cut into the edge, like Leo did... never failed me yet!~

 

[AprioriMark]

Does this need to be done?  I just played the bass with the finish on the frets, lol.

-Mark

 

[-CB-]

You can do that, but it starts to get messy when it eventually wears off...

 

[Death by Uberschall]

I taped of the board and used fine steel wool. Worked great.

 

[SustainerPlayer]

I taped of the board and used fine steel wool. Worked great.

My version too. Remember to cover the pickups as well if the neck is attached to the body.