Leaderboard

Newbie question - Complete parts list????

Briody

Newbie
Messages
5
This sounds like such a newbie question.  But I really did search the net.  I assumed I'd find lots of complete parts list online.  But I can't find one!!

I want to build a Warmoth.  I've been playing guitar for years and I know all the basic parts.  But what about the non-basic parts?

For example, do the screws to screw in the neck come with the neck?  Do tuners come with the mounting screws?

So I suppose what I'm looking for is a complete parts list to build a hardtail Strat.  Does such a list exist?
 
They do exist. So, here's what I'll do.
think about your guitar. If you need to, look up a similar guitar. Start at the top of the guitar, and work your way down. Most parts can be gotten from Warmoth.
If you post the list here, we can review it.
 
Neck
Body
Tuners
String hold downs if needed
String Nut
frets
truss rod
body
pickguard if needed
neck pickup if desired
bridge pickup if desired
bridge
string thru ferrules if needed
string thru top ferrules if needed
switch as required
volume pot as required
tone pot as required
jack plate as required
jack
knobs as required
switch tip as required
strap buttons as required
neck plate
tone capacitor as required
rear cover as required
pickup rings as required
switch ring as required
f/hole as required (I hate those cheap imported f/holes!)
and all the screws to hold it all together!~
 
Much appreciated!  Thank you!

This list really helps.  It's things like string ferrules that I would have forgotten.  Thank you again.

A few things though...... - Frets?  F-hole?  :laughing7:
 
Ok, here's what I came up with.  Everything seems to be available from Warmoth except I'm getting a prewired pickguard from Bare Knuckle.

Hardtail Strat Build List

Body PS4497
Neck         VMS3163
Vintage Strat Hardtail Bridge SFM1C
Schaller Mini Locking Tuners SMLC
Neckplate NP1C
Recessed Top Jack Plate RJP1C
Switchcraft Mono Jack MJ1
Guitar String Ferrule, Chrome GSF1C
Schaller Straplocks SSL1C
Barrel Retainer for Guitar, Chrome STG2C
Pickguard Screws Dozen S1
Neckscrew Set of 4 S4
Non Trem Bridge Screws S28
Bare Knuckle Prewired Pickguard Irish Tour / Sinner

The one thing I didn't see listed on Warmoth was screws for the tuners.
 
A few more items I didn't see listed above:

control plate (i.e. for tele or jazz bass)
wire
shielding
strings (!!!)

drewfx
 
Thanks for all the help on this everyone.  I ordered all the parts on Friday.  I went with a black-red-yellow burst with all black hardware.  I know this sounds like an unusual look - a vintage finish with all black hardware, but I have a Dean Soltero like this and it looks amazing.
 
Back
Top