Need help

[Fzau]

I want to make my own custom soloist, but I know almost nothing about wiring and electronics  :doh:
That's why I need your help! It'll have a HH-configuration, one volume and one tone knob and a three-way switch(simple, yet effective).
The pickups I'll be using are the DiMarzio Evolution (bridge) and DiMarzio FRED (neck) or the D-Sonic (bridge) and Air Norton (neck).
I was thinking about coil tapping and all, but I have absolutely no idea how it should be done..
Any help or ideas are welcome  :icon_biggrin:

Thanks!

 

[jackthehack]

If you go to the Seymour Duncan web page below, virtually any options for wiring can be found with easy to red diagrams:

http://www.seymourduncan.com/support/wiring-diagrams/

 

[kreig]

DIY installation is pretty straight forward and pretty easy. I've installed pups several times.

you can go here for some great info too - http://www.stewmac.com/freeinfo/

check out the free electronics tab

 

[Volitions Advocate]

biggest bit of help I could've used on my first build is to sand the backs of your pots a bit to get rid of whatever coating is on them. otherwize you'll have a terrible time soldering your grounds.  At least if you get  your pots from W.