The Rack from top to bottom
Senhizer wireless unit
Furman power conditioner
Rocktron Prophecy II preamp
Korg tuner
Line 6 pod xt pro (routed through the rocktrons fx loop)
DBX compressor gate (not used but have not removed yet)
QSC 3000w power amp
The speaker cabs are home made.
3/4 inch void free birch covered in line-x with a expanded metal grill.
Two 4 inch ports per cab.
Speak-on plugs on back.
I designed them with some cab building software from eminence.
The speakers are eminence Delta 12b's
Two 16 ohm 800 watt speakers per cab wired in parallel gives me 1600watts at 8 ohms.
When you run both cabs linked together it's a 3200watt half stack at 4 ohms
The whole idea was to not bring two full stacks on the road, and it worked.
When you play it turned up to 4 you can feel every palm muted note physically "kick"
When you run it at 6 all of your clothes shake and vibrate.
Its not like any tube amp I have owned in the past.
For one its about a third louder, and has a way more punchy low end that you can feel.
And two there is no bass fart or speaker distortion at ridiculously high volumes, its crystal clear and responds to exactly what you play.
It also hits the tone sweet spot much much earlier than all my tube rigs I used in the past and doesn't shit out when you push it louder.
