Converting a Spector Arc-6 Pro to a Baritone

[zeeegnome]

Basically, I would like to convert this guitar to a baritone with the stock neck (tuning would be Drop A but think B standard) but if it isn't possible with the neck on the guitar, does anyone know where to even start with knowing what I need to look into buying to do a conversion using a Warmoth neck.

I've played them before and they're FANTASTIC so I figure this would be the place to look/ask if anyone has done something similar or even knows anything about the Spector. I've emailed the people at spector and found out Korg owns the company apparently so I can't really get the info I needed from them (including the date of manufacture/origin) and I can only find what little bit I can via Reverb/MusiciansFriend/Sweetwater etc

 

[PhilHill]

I just did an image search for Spector Arc-6 Pro and the ones I saw that had bolt-on necks looked like it wouldn't work. The neck pocket is way too long. Don't know what the width of their necks are, but that would also be a factor. And you would have to drill your own mounting holes as the pattern is different. In other words, without seeing some pictures of the exact guitar your talking about, it's hard to tell whether or not modifications would be required.... :dontknow: