Rickgrxbass
Senior Member
- Messages
- 409
I'll get some pics up when my own internets are working (blagging from S*bucks right now) I quit being lazy
Upon reviewing my closet full of guitar parts, there are some things which I probably don't need anymore, figure I'd give you guys first dibs before resorting to fleaBay:
Seymour Duncan P-rails (SHPR-1 N and B), black
Leads are trimmed probably a bit short; was briefly installed on a PRS. "probably" still have the rings/screws/springs. If you get the recommended triple-shot rings it's probably a moot point, but still...
(Edit- can't find the damn rings and screws.)
$150 shipped
Mostly loaded Fender Strat pickguard, HH, black/white/black
From my MIM strat which has subsequently been upgraded. Two Fender humbuckers, five-way switch, v-t-t (although paradoxically there is no capacitor on the distal tone pot???). Missing knobs, switch tip, installation screws as well as four of the six humbucker height adjustment screws (all those were cannibalized for the new pickguard).
$50 shipped
Fender MIM bridge plate and saddles, with mounting screws, no trem block, springs, or whang bar (again, cannibalized).
$20 shipped
Warmoth 8-string fretless bass neck
Maple/bubinga/Maple neck, lined ebony FB, no face dots, looks like tru-oil finish on the back (or I'm a dilettante and it's satin nitro), gloss black peghead veneer. Includes chrome GB7 style tuners (might not actually be gotohs), nut, AND schaller chrome 8-string bridge, although I'll be honest, the nut and bridge might not be cut correctly (NOT my handiwork, mind you, I got this used...). A niche piece, to be sure. I guess this is where I'd mention the W builder puts the neck at almost $500, not including any hardware.
$300 shipped
Upon reviewing my closet full of guitar parts, there are some things which I probably don't need anymore, figure I'd give you guys first dibs before resorting to fleaBay:
Seymour Duncan P-rails (SHPR-1 N and B), black
Leads are trimmed probably a bit short; was briefly installed on a PRS. "probably" still have the rings/screws/springs. If you get the recommended triple-shot rings it's probably a moot point, but still...
(Edit- can't find the damn rings and screws.)
$150 shipped
Mostly loaded Fender Strat pickguard, HH, black/white/black
From my MIM strat which has subsequently been upgraded. Two Fender humbuckers, five-way switch, v-t-t (although paradoxically there is no capacitor on the distal tone pot???). Missing knobs, switch tip, installation screws as well as four of the six humbucker height adjustment screws (all those were cannibalized for the new pickguard).
$50 shipped
Fender MIM bridge plate and saddles, with mounting screws, no trem block, springs, or whang bar (again, cannibalized).
$20 shipped
Warmoth 8-string fretless bass neck
Maple/bubinga/Maple neck, lined ebony FB, no face dots, looks like tru-oil finish on the back (or I'm a dilettante and it's satin nitro), gloss black peghead veneer. Includes chrome GB7 style tuners (might not actually be gotohs), nut, AND schaller chrome 8-string bridge, although I'll be honest, the nut and bridge might not be cut correctly (NOT my handiwork, mind you, I got this used...). A niche piece, to be sure. I guess this is where I'd mention the W builder puts the neck at almost $500, not including any hardware.
$300 shipped