Basswood Strats
- Thread starter bbl4ck
- Start date
FWIW, I really like basswood for my basses (don't play guitar), and have put together a Deluxe 5 and a Gecko 6 with the wood. For the CA glue finish I use the softness has been a positive attribute: it really soaks into the wood and you end up with a very hard surface. Basswood looks quite lovely when bleached with the 2-part wood bleach system, and the super-thin CA glue makes it look a bit like marble. I use foam applicators and just soak it to the point it won't take any more (buy an 8-ounce bottle of the stuff), then sand to 1000 grit. If you want to paint it, you can first soak with glue and sand, then paint (I've just used spray can), then glue-coat and sand again.
Logrinn
Hero Member
- Messages
- 3,635
Seeing the thumbnails I first thought it was a solid cream color but clicking the pictures and seeing them larger I then realised it was actually the wood that was that color. Looks good with wood this light.
But what, may I ask, is that bridge? I see it's prepared for a seventh string and seem to be adjustable in all kind of directions.
Are there such a one for guitar, I wonder ...
But what, may I ask, is that bridge? I see it's prepared for a seventh string and seem to be adjustable in all kind of directions.
Are there such a one for guitar, I wonder ...
Cagey
Mythical Status
- Messages
- 24,425
I was curious, too, so I went "In Search Of..." and found that's one of a series of 4 through 8 string bridges available from Kahler. It appears to be the 7 string version.
Logrinn
Hero Member
- Messages
- 3,635
Thanks, Cagey.
I find it a bit odd that this fixed bass bridge is so simple and "streamlined-ish", while all their other bridges, especially for guitar are so big and clunky.
Or rather, I find it odd, that there isn't a similar solution for guitar. I think that could be pretty cool.
I find it a bit odd that this fixed bass bridge is so simple and "streamlined-ish", while all their other bridges, especially for guitar are so big and clunky.
Or rather, I find it odd, that there isn't a similar solution for guitar. I think that could be pretty cool.
Cagey
Mythical Status
- Messages
- 24,425
Well, Schaller makes the "Hannes" bridge which is sorta modular along the same lines, but not quite.
Still, they come in a several string counts to suit the more ambitious builder/player. They're a very comfy bridge that sounds good, but they're not quite as easy to install as one might hope, and theyr'e a tad pricey.
Still, they come in a several string counts to suit the more ambitious builder/player. They're a very comfy bridge that sounds good, but they're not quite as easy to install as one might hope, and theyr'e a tad pricey.
Axkoa
Hero Member
- Messages
- 858
Cagey said:Well, Schaller makes the "Hannes" bridge which is sorta modular along the same lines, but not quite.
Still, they come in a several string counts to suit the more ambitious builder/player. They're a very comfy bridge that sounds good, but they're not quite as easy to install as one might hope, and theyr'e a tad pricey.
I saw Crimson Guitar's video on it and it looks like a real pain to ground...
Cagey
Mythical Status
- Messages
- 24,425
Depends on how you do it. I (re)installed one for another member here who had a bit of trouble with the first tech's installation and managed to pull it off. But, I went around the original design a bit so it was easier.
Cagey
Mythical Status
- Messages
- 24,425
Thanks. What I wanted to point out was how I grounded the thing, but I couldn't find a picture on this machine. Anyway, mounting the bridge the way I did, all it takes is an "aircraft" bit...
... to drill a sideways hole from the string backup plate to the control cavity and you can run a wire. Means you gotta buy the backplate I designed from Doug, but it ends up working out better all around doing it that way anyway.
... to drill a sideways hole from the string backup plate to the control cavity and you can run a wire. Means you gotta buy the backplate I designed from Doug, but it ends up working out better all around doing it that way anyway.
stratamania
Mythical Status
- Messages
- 11,698
Doesn't the Schaller Hannes come with a string retaining plate, which you could ground to ?
In the Crimson video he seems to be using individual string ferrules instead. Not sure why.
In the Crimson video he seems to be using individual string ferrules instead. Not sure why.
That is indeed a Kahler bridge, on both the 5 and the Gecko 6. With it you can add or remove saddles as desired, and on the 5 I tried the bass as a narrow-spaced 6, which was ok but for me too narrow at the nut, and for both it and the Gecko it there for a planned future experiment adding a dummy 7th string that will terminate near the bass side of the neck joint -- the idea is to have a place for fingers to rest after plucking the lowest real string, as I've always found fingerstyle playing on the lowest string of basses to be somewhat inconsistent in sound and technique due to the lack of a rest stop.
Cagey
Mythical Status
- Messages
- 24,425
I've never been a bass player, but I used to wonder why they put a finger rest where they did on some basses...
Seems like you'd want it where you're talking about - up where your thumb could park. Some did it that way, but not as many as with the finger rest. Now you rarely see either one. I guess you're supposed to man up and use all 5 appendages on your right hand. No rest for the wicked! :laughing7:
Seems like you'd want it where you're talking about - up where your thumb could park. Some did it that way, but not as many as with the finger rest. Now you rarely see either one. I guess you're supposed to man up and use all 5 appendages on your right hand. No rest for the wicked! :laughing7:
Similar threads
