tfcreative
Senior Member
- Messages
- 200
So I'm working on this build:
http://unofficialwarmoth.com/index.php?topic=24118.0
While waiting for the body I'm experimenting with putting a logo on the headstock. The neck is all rosewood and I plan to keep it unfinished. I'm starting to experiment with some cut vinyl stencils that I made, but I'm concerned about a couple of things:
1 - Will spray paint onto raw wood ever cure hard, or will it always be prone to abrasion without some kind of clear?
2 - If it needs clear, I've heard that only finishing the front side (like with a satin clear on the front of the headstock only) can be troublesome since only part of the neck is sealed against moisture. Is there anything to this?
3 - Am I missing a far better method for doing this?
http://unofficialwarmoth.com/index.php?topic=24118.0
While waiting for the body I'm experimenting with putting a logo on the headstock. The neck is all rosewood and I plan to keep it unfinished. I'm starting to experiment with some cut vinyl stencils that I made, but I'm concerned about a couple of things:
1 - Will spray paint onto raw wood ever cure hard, or will it always be prone to abrasion without some kind of clear?
2 - If it needs clear, I've heard that only finishing the front side (like with a satin clear on the front of the headstock only) can be troublesome since only part of the neck is sealed against moisture. Is there anything to this?
3 - Am I missing a far better method for doing this?