6000 frets

[dantheyngwiefan]

Any chance of having these as an option? 6100 are OK but these would be better for me!

 

[simple]

We keep a bit of 6000 on hand so you can request it.

 

[dantheyngwiefan]

Thanks Gregg! That's great!
Dan

 

[DocNrock]

We keep a bit of 6000 on hand so you can request it.

I wish I knew that previously!  :doh:

 

[stubhead]

I'm pretty sure that Warmoth can fret a neck with fretwire you send them, like if you want the really big stainless steel fretwire that LMII carries:
http://www.lmii.com/CartTwo/thirdproducts.asp?CategoryName=Fretting&NameProdHeader=+Fretwire
(#FWSS110) = 0.057" crown height.

Check this action:
http://www.sintoms.infonet.by/FretsProduction.htm

Look at #433259 - 2.59mm crown height = 0.102" high! Now that's jumbo! :hello2: (!)  :hello2:  I'm not sure if you have to go to the Republic of Belarus yourself to pick it up.... They have some really cool fret nippers too:

Tang nippers provide a very clean L-shape cut at the fret tang butt-end.
Frets with suchwise nipped tang butt-ends provide for opportunity of decorative filling
of the slots on a fingerboard (plastic lining fitted at the edge, etc.)

I never put on a suit to nip tang butts....