Recent content by cableman

Thanks Guys, The one from the Seymour Duncan website worked. The Stew mac and all the fender diagrams are nothing like the Seymour Duncan, I have to wonder what kind od switch they work on. It sure doesn't work on my warmoth switch. Again Thanks

Hey guys, everything finally cured long enough and I put together my sons two pickup Tele last night. The problem I am having is with the switch in the middle position I get nothing. I wired by the diagram from stew-mac (link below). I have checked and rechecked and all is correct by the...

My thoughts were that I needed a little more dry time between coats, seeing this is my first time with tung oil I wasn't for sure. What thoughts do you have about polising when completed.

I think the brand name is Benhlen.  It's called pure tung oil and it came from Woodcraft. I don't think its a grain fill problem because the dull patches don't seem to be in the same places after each coat.

I'm finishing a black korina tele. Black grain filler, 3 coats. Clear grain filler, 3 coats completed to specs of my previous question. I don't believe I had any problems so far. I am now on coat 4 of tung oil. My question is that I have dull patches. For the most part its nice and glossy, but...

Thanks for the advice. That will be how I proceed. If you have time, check out some of the other black korina threads here and a lot of them say to use the 50/50 mix for a few coats. Thanks again

Thanks, but what about the 50/50 mix that is on some of the other post. Before the grain fill or after. Is it necessary at all.

Hello all, I am new here and after reading these and other guitar finishing forums I have a question. I just ordered my first body from Warmoth. A thinline f hole tele, rear routed with standard thinline controls. Black Korina back and top. It will be finished natural with tung oil. Here,s my...