Recent content by beyondat

Looks like it. The paint is frappuchino brown but turns red when I sand it.

Ok, I tried it on another surface and it powdered up also. I doen't know if it matters but I am using a special cap. Soft cap Soft

Hmmm, I noticed it powdered up as soon as I sprayed it. I was about 12inches away from the body.

I had ordered the cans about 2 weeks ago.  Temp is between 65- 75 degrees. zinsser shellac based primer and Montana nitro based spraypaint cans.

Hello, I hope you guys can give me some advice here. I have a warmoth body that I grain filled and primed. I am using montana spraypaint and after I gave it a few coats it turned into a powdery substance and i could brush the paint of with my finger. when I tried to sand it it turned into a red...

Greetings, I plan on using  A preval sprayer to paint a bass body I have and wanted to know if the paint would need to be thinned because it is pretty thick. If so would i be able to thin it with water since it is water based. I heard that too much water would cause it to lose its ability to...

Cool, thanks to everyone for sending me down the right path! I'm gonna try and mix stain/metalflakes into miniwax wipe-on poly and apply very thin coats until I build up the color I am looking for. I know lacquer would be better for this but honestly I am not patient enough to wait for it to...

Would you know were I can find the proper metal flakes to add to the color? Sorry for so many questions.

From the looks of the chipped finish it looks as though the coloring was mixed into whatever finish they use. The layer of color looks really thick and the wood underneath doesn't even look stained at all. Would this mean that they sprayed a thin clear coat first and later applied a brown tinted...

A refinished body and headstock is all the experience I have and I used  poly sprayed from a can. I don't have any equipment. Is it possible to mix stain with Miniwax wipe-on poly and then apply it to the body since I don't have a spray gun? Thanks

Thanks for the heads up

Hello, does anybody know where I can find this color  stain/paint? I don't know if its stain or paint. help will be appreciated, Thanks http://www.talkbass.com/forum/showthread.php?t=604154

I know this is a warmoth site(forgive me!) but my question is about the Peavey Grind that I just purchased that seems to have little to no finish at all. Could anyone suggest something easy to use that would give it a little sheen? i was looking at miniwax wipe on Poly or would an oil be better...

Its not only the money, I just want to have a bass that I sort of created myself. You did say that I can sand it down if I mess up right? i just needed to know if its was stain or paint. I would use only to colors anyway, walnut and amber! Its seems that this can be achieve with aerosol cans.

Hello, I have my eye on this body http://www.warmoth.com/showcase/sc_guitar_bodies.cfm?type=bass&start=1&itemNumber=B1025&menuItem=1&subMenuItem=0&subMenuItem2=0 I wanted to know if it is possible for it to look somewhat like this http://themusicelement.com/fenderbird.jpg Canary top with a Black...