Recent content by Ayrton

Yep, gonna dig out a stompbox tuner for the bench I guess. I did a trial with a neck that needs a new board before I used this neck. I looked at ordering a B&B neck, but very pricey. I figured the worst thing that could happen is I destroy a $100 Allparts neck.  :icon_biggrin:

The DB Telecaster is the pinnacle for me. I have built many.

I hadn't done it before either!  :icon_biggrin: This neck was the trial run. I just did what seemed logical, but if I do it again I think the bearing bit and the fence should be used. The bearing, of course, will repeat any flaw in the neck, and I think the fence will help alleviate that. This...

I know some have very strong opinions about headstock shapes and logos. These guitars are for my enjoyment, and the idea is it could have been something Fender had made. Nothing more than part of the "look" if you will. Oh, and thanks!  :occasion14:

Bored and snooping through the showcase, I see this body on sale and I bought it without really a plan. First I thought I would wait for a matching Limba neck, but nothing close ever popped up. I wanted to combine the Starcaster with the Coronado style neck. Ordering a B&B neck is hella...

What a total suck fest getting this thing wired up. Considering the idea is for DIY builders, you would think Warmoth would be all over this. The toggle is a serious PITA with trying to keep enough washers (I used a nut to hold washers) in place and finagle the switch. The more user-friendly...

K you are a life saver. I could not for the life of me figure out why my switch would not sit level.

Guys, I have a project that requires me to get a Fender style bullet truss nut onto a vintage modern Warmoth neck. From the looks of if I can drill out the plug, but I am not sure the Fender nut is long enough to reach. Can the Warmoth nut be removed? What is the approx angle of the Warmoth...

I don't even believe that is possible, but even if it were, plenty of manufactures recess covers.

Try here http://www.monsterguitarshop.com/pickguards.htm

Just got it myself...

I have wet sanded Tru Oil and then polished it no problem. Be gentle unless it has cured for a week or so, but you can polish it out.

- I don't see why not - 6115 .107" x .052" - No, but every neck I have ordered from Warmoth needed very little or no tweaks to be perfect.

Great news! Terrible news! Seriously though, Ibanez parts would be huge for Warmoth.

I like the colors, the more  I look at it. I think it really has a "Lynch tiger" look to it. Nice!  :headbang: