WTB: Jackson/Charvel reverse headstock w/maple board

[Fretty Von Fretterson]

Hi guys.

I'm looking for a Charvel/Jackson 80s pointy neck. It could be a Warmoth or the real deal from the 80s. I know there's a couple old Charvel's on the 'bay right now, but the rosewood or non-reverse is a no-go for my project.
Must have the following:

Reverse Headstock (or a straight up lefty neck 'cuz that's it will be used for)
Maple Board
22 Fret
25.5" scale (maybe a 24.75" conversion neck)

Thanks in advance!

...oh, and rock on.  :guitarplayer2:

 

[AutoBat]

I priced one out at $308 in the builder at 25.5" scale, 22 frets, maple/maple, standard-thin, 1 11/16" width, gloss finish, SS6100 frets, tusq xl nut, left handed, black dots.

Someone inquired about fairly recently about Jackson necks and although I can't comment on the 80s models, the current run Jackson necks are not compatible with 'standard' fender neck pockets (which is what all the W necks are made for).

 

[bagman67]

Crud.  I have a perfectly serviceable righty Charvel neck with a maple board I would have let you have for a very reasonable price.  Ah, well.  Happy hunting.

 

[Fretty Von Fretterson]

I priced one out at $308 in the builder at 25.5" scale, 22 frets, maple/maple, standard-thin, 1 11/16" width, gloss finish, SS6100 frets, tusq xl nut, left handed, black dots.

Someone inquired about fairly recently about Jackson necks and although I can't comment on the 80s models, the current run Jackson necks are not compatible with 'standard' fender neck pockets (which is what all the W necks are made for).

Ya, we're talking about the 2 1/4" heel width. I think most all of the 80s production Charvels and Jacksons had that "fat butt" to them.  :laughing7:

Although I can't speak for those really early San Dimas/Boogie Bodies necks.


Oh, and PM for Bagman67!

 

[bagman67]

Mine is from a Japanese Model 1A, and a Warmoth neck dropped right in and fit perfectly.