Wiring for Tele Custom

[benferrari]

hello guys,

i'm building a 72 tele custom and was wondering if you guy know what the parts are and how its wired?

I've been looking at the fender diagram but some of it is quite vague. i.e there is a wire that runs for the pickup selector and just runs off the diagram?.

any one know the answer?
http://support.fender.com/diagrams/telecaster/0137500C/SD0137500CPg2.pdf

thanks very much!

Ben

 

[-CB-]

Wired just like a Les Paul.

Each pickup goes to a volume pot, and the "output" of the volume pot goes to the LP type switch.  The output of the switch goes to the output jack.  The tone controls are wired from the pickups "hot" wire, where it's soldered to the volume pot's lug... all just like a lester.

 

[Unwound G]

Wired just like a Les Paul.

Each pickup goes to a volume pot, and the "output" of the volume pot goes to the LP type switch.  The output of the switch goes to the output jack.  The tone controls are wired from the pickups "hot" wire, where it's soldered to the volume pot's lug... all just like a lester.

+1.  In fact I just emailed a diagram to a friend for the same wiring.  Here it is :-